Rim Drive Technology

RIM Drive Technology POD 5.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Model    POD 5.0
Motor type    PR133-M- 48V
Input Power*    5kW
Nominal current    104A
Nominal voltage    48V
Weight    5 kg
Propeller diameter    133 mm
Outside diameter    185 mm
Motor length    150 mm
IP Class    IP68
Static thrust    62 kg
Salt Water resistant    Yes
Cable length    2 m
Motor controller**    48V 100A
Length    160 mm
Width    200 mm
Height    72 mm
Weight    3.25 kg

Also you can check product : New RIM Drive POD 15.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology Outboard 3.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATIONS :

Maximum input power of 3.0kW
Nominal voltage of 48V
Equivalent to a 6.5 PK petrol motor
Including battery cable of 0.5 meter
Limited weight of 22kg
Efficiency of more than 90%
Completely waterproof (IP68)
Ideal in combination with our 48V 100 Ah battery
5 trim settings
Foldable with the assistance of gas springs
Shaft length short 68.4 cm
Universal battery connector

Also you can check product : New RIM Drive Outboard 5.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology Outboard 5.0
Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials


SPECIFICATIONS

Nominal voltage of 48V
Equivalent to a 10.0 PK petrol motor
Including battery cable of 0.5 meter
Minimal weight of 25kg
Efficiency of more than 90%
Completely waterproof (IP68)
Average operating time of 4 hours with our 48V 100Ah battery
5 trim settings
Shaft length 71.2 cm
Universal battery connector

Also you can check product : New RIM Drive Outboard 3.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology POD 8.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Maximum input power of 8.0kW
Nominal voltage of 48V
Equivalent to a 11.0 PK petrol motor
Including cable set (2 meter)
Minimal weight of 14.0 kg
Efficiency of more than 90%
Completely waterproof (IP68)
Motor controller included

Also you can check product : New RIM Drive POD 5.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology POD 11.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Part number     06.07.0144
Model     POD 11.0
Motor type     PR212-M- 48V
Input Power*     11kW
Nominal current     230A
Nominal voltage     48V
Motor dimensions     
Weight     14 kg
Propeller diameter     212 mm
Outside diameter     290 mm
Motor length     172 mm
Motor classifications     
IP Class     IP68
Static thrust     156 kg
Salt water resistant     Yes
Cable length    2 m
Controller specifications
Motor controller**     48V 250A
Length     160 mm
Width     200 mm
Height    72 mm
Weight     3.25 kg

Also you can check product : New RIM Drive POD 8.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology Outboard 8.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Maximal input power of 8.0kW
Nominal voltage of 48V
Equivalent to a 11PK Petrol motor
Including battery cable of 0.5 meter
Minimal weight of 34 kg
Efficiency of more than 90%
Completely waterproof (IP68)
5 trim settings
Shaft length 77.4 cm
Universal battery connector

Also you can check product : New RIM Drive Outboard 11.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology POD 15.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?
Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Part number    06.07.0145
Model     POD 15.0
Motor type     PR212-M- 48V-Pro
Input Power*      15kW
Nominal current     300A
Nominal voltage     48V
Motor dimensions     
Weight    19 kg
Propeller diameter     212 mm
Outside diameter     290 mm
Motor length     207 mm
Motor classifications     
IP Class     IP68
Static thrust      195 kg 
Salt water resistant     Yes
Cable length    2 m
Controller specifications     
Motor controller**     48V 600A
Length     250 mm
Width     200 mm
Height    72 mm
Weight     4.9 kg

Also you can check product : New RIM Drive POD 30.0 - Electric Outboard Motors - Sale !!

RIM Drive Technology Outboard 11.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATIONS

Maximum input power of 11.0kW
Nominal voltage of 48V
Equivalent to a 20 PK petrol motor
Including battery cable of 0.5 meter
Minimal weight of 32 kg
Efficiency of more than 90%
Completely waterproof (IP68)
Average operating time of 7 hours with our 48V 200Ah battery (2 units)
5 trim settings
Foldable with the assistance of gas springs
Shaft length 77.4 cm
Universal battery connector

Also you can check product : New RIM Drive Outboard 5.0 - Electric Outboard Motors - Sale !!

RIM DRIVE Technology
Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATIONS

Maximum input power of 15.0kW
Nominal voltage of 48V
Equivalent to a 28.0 PK petrol motor
Including battery cable of 2.0 meter
Limited weight of 40kg
Completely waterproof (IP68)
Ideal in combination with our 48V 200Ah battery
5 trim settings
Foldable with the assistance of gas springs
Shaft length 77.1 cm

Also you can check product : New RIM Drive Outboard 8.0 - Electric Outboard Motors - Sale !!

RIM DRIVE Technology POD 25.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Rim Drive Technology believes in offering the total solution for every client within every market: from electric motor to battery, from throttle control to battery monitor. A rim drive motor has some specific advantages in comparison to other (electric) motors:

- Very little chance to seize your propeller due to axle less design

- No wear parts within the motor design

- Completely water lubricated

- No oil used anywhere within the motor

- Minimal dimensions

- Lightweight

- High reaction speed

- Individual programming possible

- High efficiency

- Only one rotational part

- Only salt water resistant materials

SPECIFICATION

Part number    06.07.0146
Model     POD 25.0
Motor type     PR341-M- 96V
Input Power*      25kW
Nominal current     260A
Nominal voltage     96V
Motor dimensions     
Weight    70 kg
Propeller diameter     350 mm
Outside diameter     470 mm
Motor length     277 mm
Motor classifications     
IP Class     IP68
Static thrust     380 kg
Salt water resistant     Yes
Cable length    2 m
Controller specifications     
Motor controller**      48V 600A
Length      250 mm
Width     200 mm
Height    72 mm
Weight     4.9 kg

* Input Power (kW) is depending on water conditions  usage and installation.

Also you can check product : New RIM Drive Outboard 15.0 - Electric Outboard Motors - Sale !!

RIM DRIVE Technology POD 30.0

Maritime POD – Motor

There are good reasons to select an electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase, they have set goals to minimize installation and service costs for their users. By having just one rotating part, they have achieved minimized maintenance costs. On the other hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.
 
Why Rim Drive Technology?

Rim Drive Technology was founded in 2019 and is located in the Netherland. They develop and manufacture electric motors from 0.5 to 50kW for industrial, commercial and subsea applications. In order to provide customers the perfect fit for their application They realized highly configurable products which can be used for many applications. As a propulsion motor they offer the following configurations up to 50kW: POD, bow thruster, steerable POD and outboard. Quality is their top priority. In order to guarantee the quality of their products, their production is located in the Netherlands. They strive to achieve their production process constant to complete quality control. Not only is the production quality higher here, the monitoring of the quality is also a lot easier. In addition, more companies are asking for sustainably produced products. The production and development of products in the Netherlands has a demonstrably lower environmental impact.

Key Features:

Maximum input power of 30.0kW
Nominal voltage of 110V
Equivalent to a 52.0 PK petrol motor
Including cable set (2 meter)
Minimal weight of 70 kg
Efficiency of more than 90%
Completely waterproof (IP68)
Maximum depth of 50 meter with optional upgrade to 3000 meter possible
Motor controller included

SPECS :

Part number    06.07.0147
Model     POD 30.0
Motor type     PR341-M- 110V
Input Power*      30kW
Nominal current     273A
Nominal voltage     110V
Motor dimensions     
Weight    70 kg
Propeller diameter     350 mm
Outside diameter     470 mm
Motor length     277 mm
Motor classifications     
IP Class     IP68
Static thrust     400 kg
Salt water resistant     Yes
Cable length    2 m
Controller specifications     
Motor controller**      96V 600A
Length      320 mm
Width     200 mm
Height    72 mm
Weight     6.2 kg

Also you can check product : New RIM Drive POD 25.0 - Electric Outboard Motors - Sale !!