Icom
The simplified ARPA function helps to prevent a collision risk with other vessels or objects. Up to five targets can be automatically tracked on the radar echo, when a target enters within the set watch area, (or up to ten targets can be tracked when manually set). By selecting one of the targets, the target information such as position, course, speed, CPA, TCPA, bearing, and distance is shown on the lower side of the display. When the target enters within the CPA and TCPA limits, an alarm message is displayed with a beep alarm.
The simplified ARPA function*1 *2 assists you to prevent your vessel from colliding with other vessels or objects. When a target enters the preset watch area, it is automatically tracked on the radar echo. By selecting one of the targets, the target information, such as position, course, speed, CPA (Closest Point of Approach), TCPA (Time to CPA), bearing, and distance is displayed. When a target enters the CPA, or it exceeds the set TCPA, an alarm sounds to warn you.
New ICOM MR-1010RII Marine Radar - Sale !! (MR-1010RII)
The simplified ARPA function helps to prevent a collision risk with other vessels or objects. Up to five targets can be automatically tracked on the radar echo, when a target enters within the set watch area, (or up to ten targets can be tracked when manually set). By selecting one of the targets, the target information such as position, course, speed, CPA, TCPA, bearing, and distance is shown on the lower side of the display. When the target enters within the CPA and TCPA limits, an alarm message is displayed with a beep alarm.
DSC (Digital Selective Calling) Information Function*
When connected to a DSC radio and a DSC call is received, the received message is transferred to the MR-1010RII. Up to 20 DSC messages can be plotted on the radar echo. If a MOB position information is transmitted from a DSC handheld transceiver (including Icom IC-M94D), the MR-1010RII can show the MOB waypoint on the radar echo to assist in search and rescue operation.
AIS (Automatic Identification System) Overlay Function*
When connected to an external AIS device (including Icom IC-M605, IC-M510 AIS and, IC-M506 AIS), up to 100 AIS target icons are overlaid on the radar echo. By selecting an AIS icon, vessel information such as AIS class, MMSI number, vessel name, course, speed, CPA, TCPA, bearing and distance are shown on the lower side of the display.
Wide Viewing Angle Color TFT LCD
The wide viewing angle color TFT LCD offers bright, vivid echoes with 16 steps gradient intensity. The screen intensity and screen color (day, night and user settings) can be instantly adjusted with the "BRILL" button. In addition, the auto hide information function enlarges radar echoes to full size.
Multi-Lingual Intuitive User Interface
The language setting of the MR-1010RII is selectable from multiple languages.* The large eight-direction cursor key provides smooth operation even when wearing gloves. Various settings can be configured through visually intuitive operation.
Optional Video Output Unit
With an optional video output unit, UX-252*, the MR-1010RII can be connected to an external display. Same radar echoes can be observed on the main unit and external display at the same time.
TLL (Target Latitude Longitude) Function*
The MR-1010RII can mark points with icons and transfer the position data with NMEA TLL sentences to other NMEA 0183 devices such as an external plotter.
True Trail Function*
The true trail function cancels own ship movement and shows true moving objects with trails, while static objects are not trailed.
* External bearing and position data required.
SPECS :
Display Unit
Display type 10.4-inch Color TFT LCD
Resolution 480 × 640 dots
Minimum range 25 m; 82 ft (at 1⁄8 NM range)
Maximum range 36 NM
Range scales NM 1⁄8, 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4,
6, 8, 12, 16, 24, 32, 36
km 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4,
6, 8, 12, 16, 24, 32, 36, 48
Preheat time 90 seconds
Power supply 10.2–42 V DC
Power consumption
(at zero wind velocity) 55 W (approximately)
Usable temperature range −15°C to 55°C; 5°F to 131°F
Input data format NMEA 0183, N 1, AUX, IEC61162-2
Output data format NMEA 0183
Scanner Unit
Type 60 cm; 2 ft radome scanner
Rotation speed 24, 36 rpm typ.
Horizontal beamwidth 4° typ.
Vertical beamwidth 22° typ.
Sidelobe −22 dB typ.
Usable temperature range −25°C to 70°C; −13°F to 158°F
Usable humidity range Less than 95% (at 40°C; 104°F)
Frequency 9410 MHz ±30 MHz
Modulation P0N
Peak output power 4 kW
Pulse-width/repetition rate 80 ns/2160 Hz, 80 ns/1440 Hz,
250 ns/1440 Hz, 350 ns/1440 Hz,
900 ns/720 Hz
Modulator FET switching
Intermediate frequency 60 MHz (EUR Version), 250 MHz (EXP Version)
IF bandwidth 10 MHz / 3 MHz (EUR Version), 15 MHz / 3 MHz (EXP Version)
Tuning Auto/manual selectable
Supplied system cable 15 m; 49.2 ft (OPC-2341)
Applicable IP Rating
Ingress Protection Standard
Display unit IPX4 (Water resistance)
Scanner unit IPX6 (Powerful jet water protection)
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
Scanner unit
System cable (15 m)
Also you can check product : New ICOM MR-1220 Marine Radar - Sale !!
DSC (Digital Selective Calling) Information Function*
When connected to a DSC radio and a DSC call is received, the received message is transferred to the MR-1010RII. Up to 20 DSC messages can be plotted on the radar echo. If a MOB position information is transmitted from a DSC handheld transceiver (including Icom IC-M94D), the MR-1010RII can show the MOB waypoint on the radar echo to assist in search and rescue operation.
AIS (Automatic Identification System) Overlay Function*
When connected to an external AIS device (including Icom IC-M605, IC-M510 AIS and, IC-M506 AIS), up to 100 AIS target icons are overlaid on the radar echo. By selecting an AIS icon, vessel information such as AIS class, MMSI number, vessel name, course, speed, CPA, TCPA, bearing and distance are shown on the lower side of the display.
Wide Viewing Angle Color TFT LCD
The wide viewing angle color TFT LCD offers bright, vivid echoes with 16 steps gradient intensity. The screen intensity and screen color (day, night and user settings) can be instantly adjusted with the "BRILL" button. In addition, the auto hide information function enlarges radar echoes to full size.
Multi-Lingual Intuitive User Interface
The language setting of the MR-1010RII is selectable from multiple languages.* The large eight-direction cursor key provides smooth operation even when wearing gloves. Various settings can be configured through visually intuitive operation.
Optional Video Output Unit
With an optional video output unit, UX-252*, the MR-1010RII can be connected to an external display. Same radar echoes can be observed on the main unit and external display at the same time.
TLL (Target Latitude Longitude) Function*
The MR-1010RII can mark points with icons and transfer the position data with NMEA TLL sentences to other NMEA 0183 devices such as an external plotter.
True Trail Function*
The true trail function cancels own ship movement and shows true moving objects with trails, while static objects are not trailed.
* External bearing and position data required.
SPECS :
Display Unit
Display type 10.4-inch Color TFT LCD
Resolution 480 × 640 dots
Minimum range 25 m; 82 ft (at 1⁄8 NM range)
Maximum range 36 NM
Range scales NM 1⁄8, 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4,
6, 8, 12, 16, 24, 32, 36
km 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4,
6, 8, 12, 16, 24, 32, 36, 48
Preheat time 90 seconds
Power supply 10.2–42 V DC
Power consumption
(at zero wind velocity) 55 W (approximately)
Usable temperature range −15°C to 55°C; 5°F to 131°F
Input data format NMEA 0183, N 1, AUX, IEC61162-2
Output data format NMEA 0183
Scanner Unit
Type 60 cm; 2 ft radome scanner
Rotation speed 24, 36 rpm typ.
Horizontal beamwidth 4° typ.
Vertical beamwidth 22° typ.
Sidelobe −22 dB typ.
Usable temperature range −25°C to 70°C; −13°F to 158°F
Usable humidity range Less than 95% (at 40°C; 104°F)
Frequency 9410 MHz ±30 MHz
Modulation P0N
Peak output power 4 kW
Pulse-width/repetition rate 80 ns/2160 Hz, 80 ns/1440 Hz,
250 ns/1440 Hz, 350 ns/1440 Hz,
900 ns/720 Hz
Modulator FET switching
Intermediate frequency 60 MHz (EUR Version), 250 MHz (EXP Version)
IF bandwidth 10 MHz / 3 MHz (EUR Version), 15 MHz / 3 MHz (EXP Version)
Tuning Auto/manual selectable
Supplied system cable 15 m; 49.2 ft (OPC-2341)
Applicable IP Rating
Ingress Protection Standard
Display unit IPX4 (Water resistance)
Scanner unit IPX6 (Powerful jet water protection)
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
Scanner unit
System cable (15 m)
Also you can check product : New ICOM MR-1220 Marine Radar - Sale !!
The simplified ARPA function helps to prevent a collision risk with other vessels or objects. Up to five targets can be automatically tracked on the radar echo, when a target enters within the set watch area, (or up to ten targets can be tracked when manually set). By selecting one of the targets, the target information such as position, course, speed, CPA, TCPA, bearing, and distance is shown on the lower side of the display. When the target enters within the CPA and TCPA limits, an alarm message is displayed with a beep alarm.
New ICOM MR-1220 Marine Radar - Sale !! (MR-1220)
Simplified Automatic Radar Plotting Aids (ARPA) Function
The simplified ARPA function*1 *2 assists you to prevent your vessel from colliding with other vessels or objects. When a target enters the preset watch area, it is automatically tracked on the radar echo. By selecting one of the targets, the target information, such as position, course, speed, CPA (Closest Point of Approach), TCPA (Time to CPA), bearing, and distance is displayed. When a target enters the CPA, or it exceeds the set TCPA, an alarm sounds to warn you.
Digital Selective Calling (DSC) Information Display function
When connected to a DSC radio and a DSC call is received, the received message is displayed on the MR-1220*1. The function shows the DSC message, and the location where the DSC call is transmitted. Up to 20 DSC messages can be plotted. A Man Overboard waypoint can also be displayed.
Automatic Identification System (AIS) Overlay Function
When connected to an external AIS device (including Icom IC-M605 and IC-M506 AIS), up to 100 AIS target icons are overlaid on the radar echo*1. By selecting an AIS icon, vessel information such as AIS class, MMSI number, vessel name, course, speed, CPA, TCPA, bearing, and distance is displayed.
External Buzzer Connection
The MR-1220 has an external buzzer terminal on the rear panel. You can sound an alarm beeper to effectively inform of danger, when a target enters the CPA or it exceeds the TCPA*3.
Plot Function
The Plot function*1 records your vessel's longitude and latitude at the set time interval, and displays your track on the radar echo.
Optional Video Output Unit
With the optional UX-234 video output unit, the MR-1220 can be connected to an external display. The same radar echoes can be displayed on the main and secondary displays at the same time.
SPECS :
The Plot function*1 records your vessel's longitude and latitude at the set time interval, and displays your track on the radar echo.
3D Display Function
The MR-1220 provides an intuitive bird's-eye view. You can change the display angle according to your own preference. The 2D view can be displayed at the same time.
Multi-Lingual User Interface
You can select the display language from English, Indonesian, Korean, Malay, Rus s ian, Spanish, Thai, and Vietnamese.
Optional Video Output Unit
With the optional UX-234 video output unit, the MR-1220 can be connected to an external display. The same radar echoes can be displayed on the main and secondary displays at the same time.
Other Features
- Target Latitude Longitude (TLL) function*1
- True Trail function*1
- Two user programmable alarm zones
- Waypoint indication
- Power Save function ....and more
SPECS :
Display Unit
| DISPLAY UNIT | MR-1220R4 | MR-1220T4 | MR-1220T6 | MR-1220T6L |
|---|---|---|---|---|
| Display | 12.1-inch color TFT LCD | |||
| Resolution (H × V) | 600 × 800 dots | |||
| Minimum range | 25 m; 82 ft (at 1/8 NM range) | |||
| Maximum range | 36 NM | 48 NM | 72 NM | 72 NM |
| Power supply requirement | 12/24 V DC | |||
| Dimensions (W × H × D; projections not included) | 301 × 323.5 × 119.2 mm | |||
| Weight (approx.) | 4.8 kg | |||
| Usable temperature range | −15 °C to 55 °C | |||
| Power consumption (approx.) | 60 W | 70 W | 80 W | 90 W |
| Available scanner unit | 2 ft (60 cm) radome | 4 ft (120 cm) open array | 4 ft (120 cm) open array | 6.5 ft (200 cm) open array |
Scanner Unit
| SCANNER UNIT | SC-R40 (MR-1220R4) | SC-T40 (MR-1220T4) | SC-T60 (MR-1220T6) | SC-T60L (MR-1220T6L) | |
|---|---|---|---|---|---|
| Type | 2 ft (60cm) radome | 4 ft (120 cm) open array | 4 ft (120 cm) open array | 6.5 ft (200 cm) open array | |
| Peak output power | 4 kW | 4 kW | 6 kW | ||
| Rotation speed | 24, 36 rpm typical | 24, 36 rpm typical | 22, 24, 36 rpm typical | ||
| Beamwidth | Horizontal | 4° typical | 2° typical | 2° typical | 1.2° typical |
| Vertical | 22° typical | 23° typical | 23° typical | 23° typical | |
| Sidelobe | −22 dB typical | −24 dB typical | −24 dB typical | −27 dB typical | |
| Transmission frequency | 9410 MHz ±30 MHz | 9410 MHz ±30 MHz | 9410 MHz ±30 MHz | ||
| Dimensions (W × H × D; projections not included) | 640 × 256 × 640 mm | 1217 (dia.) × 395 (H) mm | 1217 (dia.) × 395 (H) mm | 1995 (dia.) ×395 (H) mm | |
| Weight (approx.) | 8 kg | 18 kg | 18 kg | 20 kg | |
| Usable temperature range | –25 °C to 70 °C | –25 °C to 70 °C | –25 °C to 70 °C | ||
| Connection cable | 15 m (OPC-2341) | 20 m (OPC-2342) | 20 m (OPC-2342) | ||
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| Display unit | IPX4 (Water resistance) |
| Scanner unit | IPX6 (Powerful jet water protection) |
The simplified ARPA function*1 *2 assists you to prevent your vessel from colliding with other vessels or objects. When a target enters the preset watch area, it is automatically tracked on the radar echo. By selecting one of the targets, the target information, such as position, course, speed, CPA (Closest Point of Approach), TCPA (Time to CPA), bearing, and distance is displayed. When a target enters the CPA, or it exceeds the set TCPA, an alarm sounds to warn you.
- 1