Mercury
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
A high-displacement footprint allows the V-8s to work smarter – not harder – with lower max rpm to ensure longer engine life. Engine Guardian is standard and averts potential problems with timely intervention, while the Cool Fuel Module prevents vapor lock. Long runner intakes pack more air into the chamber, while the advanced MPI system fine-tunes the fuel-to-air mix, producing more power on combustion. High performance aluminum cylinder heads improve mid-range acceleration. Optional SmartCraft® Digital Throttle & Shift provides silky-smooth operation.
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
Mercury ProKicker outboards enable precision boat control, even in the toughest fishing conditions. Quiet, smooth and efficient, they make long hours of trolling more productive – and more enjoyable.
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
The Mercury Jet is designed to get you through some of the most challenging waters anywhere. Specifically engineered to propel boats in shallow water where traditional outboards are unable to operate, Mercury outboard jets replace the gear case with a jet pump that sits even with the bottom of the boat and provides you with the ability to go wherever the fish or fowl are.
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
A 6.2-liter V-8 engine with unparalleled torque and acceleration to get you on plane quickly and smoothly. Power and acceleration is delivered with 6.2 liters of displacement and a long-runner scroll intake manifold that optimizes air flow for higher torque. A 6.2-liter V-8 engine with unparalleled torque and acceleration to get you on plane quickly and smoothly.
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.Modular batteries and multiple controls, displays and chargers make it easy to optimize your Avator 20e or 35e propulsion system for wherever your imagination leads you.
Featuring a host of engineering innovations, the 4.5L series establishes new standards for power-to-weight ratio, driver experience, acceleration, durability, and ease of maintenance.Built for Marine: Designing a V-6 block solely for marine use allows Mercury to build the 4.5L with the ultimate protection system, using cast-iron componentry where the engine intersects with seawater, and using corrosion-resistant aluminum and composites everywhere else.
When you're feeding your need for speed, Mercury Pro XS engines will get you there faster. Engineered to meet the demands for high speeds on fresh or salt water, these high-performance motors deliver a winning combination of power, acceleration, durability, and fuel efficiency. Ideal for a wide range of fresh and saltwater boats. Great for compact bass, multi-species, flats and bay boats, and pontoons.
Season after season, these durable, easy-to-maintain SeaPro commercial outboards deliver reliable starts and improved fuel efficiency. By generating serious torque at low rpm, they provide more power with less stress on the engine. Get on plane faster – and stay there longer at lower speeds.
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
The SeaPro series engines from Mercury Marine fulfil the needs of commercial applications by generating more power and less engine stress. When you spend a whole day on the water for search & rescue, whale watching, fishing and doing other activities, you wish for a controlled throttle experience to make things easier. And the Mercury SeaPro 200XL 4S DTS Outboard provides the confidence you require with its unprecedented performance in different water conditions. Every day, even in the toughest conditions, SeaPro high-horsepower outboards are built to tackle the biggest jobs. They feature heavy-duty components designed to work as hard as you do, with unmatched corrosion resistance to go wherever the task takes you.
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.Modular batteries and multiple controls, displays and chargers make it easy to optimize your Avator 20e or 35e propulsion system for wherever your imagination leads you.
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
New Mercury 35hp 4 Stroke Jet Outboard Engine 35ELPT - Sale !! (35ELPT)
The Big Tiller
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
FourStroke Jet Outboards
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
SPECIFICATIONS - 35
HP / kW
35 / 26
Engine type
Inline 4
Displacement (CID/CC)
60.8 / 995
Full throttle RPM
5000-6000
Fuel induction system
2 valves per cylinder, single overhead cam (SOHC)
Alternator amp / Watt
18 amp / 226 watt
Recommended fuel
87 octane / up to 10% ethanol
Recommended oil
Mercury FourStroke Oil 10W-30
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Electric (turn-key)
Steering
Big Tiller
Remote
Tiller Kit
Shaft length
15" / 381 mm
Dry weight *Lightest model available
267 lbs / 121 kg
CARB star rating
3
Bore and stroke
2.56 x 2.95" / 65 x 75 mm
Ignition
ECM 07 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Gearcase options
Jet Drive
Trim system
Power Trim
Color
Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury 40hp 4 Stroke Jet Outboard Engine 40ELPT - Sale !!
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
FourStroke Jet Outboards
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
SPECIFICATIONS - 35
HP / kW
35 / 26
Engine type
Inline 4
Displacement (CID/CC)
60.8 / 995
Full throttle RPM
5000-6000
Fuel induction system
2 valves per cylinder, single overhead cam (SOHC)
Alternator amp / Watt
18 amp / 226 watt
Recommended fuel
87 octane / up to 10% ethanol
Recommended oil
Mercury FourStroke Oil 10W-30
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Electric (turn-key)
Steering
Big Tiller
Remote
Tiller Kit
Shaft length
15" / 381 mm
Dry weight *Lightest model available
267 lbs / 121 kg
CARB star rating
3
Bore and stroke
2.56 x 2.95" / 65 x 75 mm
Ignition
ECM 07 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Gearcase options
Jet Drive
Trim system
Power Trim
Color
Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury 40hp 4 Stroke Jet Outboard Engine 40ELPT - Sale !!
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
New Mercury 380 HP 8.2 MAG ECT 8.2L Inboard Engine - Sale !! (Mercury 380 HP 8.2 MAG ECT)
Durable.
A high-displacement footprint allows the V-8s to work smarter – not harder – with lower max rpm to ensure longer engine life. Engine Guardian is standard and averts potential problems with timely intervention, while the Cool Fuel Module prevents vapor lock.
Repower Financing.
With Mercury Repower Financing, you can easily power up everything from fishing boats, to runabouts, to cruisers with flexible financing on the engine. You can also choose to finance rigging, gauges, controls and even labor. Mercury Repower Financing offers low rates and low monthly payments to fit a boater’s budget.
High Technology.
Long runner intakes pack more air into the chamber, while the advanced MPI system fine-tunes the fuel-to-air mix, producing more power on combustion. High performance aluminum cylinder heads improve mid-range acceleration. Optional SmartCraft® Digital Throttle & Shift provides silky-smooth operation.
Owners Manuals
Need an Owner’s Manual for your Mercury engine to perform maintenance, replace parts or just learn more about your engine? Mercury has made it easy for you to purchase a printed copy or to download and print your own copy. To order a printed version of the Service Manual for your particular Mercury Outboard or MerCruiser Engine.
Big Power From Little Gas.
These big blocks put all the power you want on the line when you need it – just the ticket for larger cruisers. The high-output alternator generates 65 percent more power than previous models. Yet the MPI and ECT systems also ensure maximum fuel economy. And these engines take 87-octane gas!
Corrosion Protection.
The MercFusion Paint System creates an outer seal against the elements, while MerCathode® provides automatic protection against galvanic corrosion. For maximum defense against saltwater effects, the SeaCore® industrial hardcoat anodizing system and closed-cooling circuit is available.
SPECS :
HP / kW
380 / 283
Maximum RPM (WOT)
4600 - 5000
Engine type
V8
Displacement (L)
8.2
Bore and stroke
4.47 x 4.00" / 113.5 x 101.6 mm
Compression ratio
8.75:1
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Engine control system
PCM 09 with SmartCraft CAN capability OBD-M diagnostics Dual oxygen sensors
Fuel delivery system
Multi-point Electronic Fuel Injection (MPI)
Air induction
High inertia induction system
Ignition
Distributorless ignition with knock control
Alternator amp / Watt
65 amp / 917 watt
Water drain system
Single point air actuated
Exhaust system
Tuned runner exhaust manifolds with 316 stainless steel tubular dry joint elbows
Cooling system
Brass sea water pump
Closed cooling
Long life 5-year antifreeze
Accessory drive system
Auto-tensioner
Serpentine belt
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine guardian system
SmartCraft Engine Guardian
Dimensions (L x W x H)
35 x 33 x 24" / 878 x 838 x 610 mm
Weight (engine only)
1,122 lbs / 509 kg
Compatible drives
Bravo One X
Bravo One XR
Bravo Three X
Bravo Three XR
Bravo Two X
Also you can check product : New Mercury 370 HP 6.2L Jet Inboard Engine - Sale !!
A high-displacement footprint allows the V-8s to work smarter – not harder – with lower max rpm to ensure longer engine life. Engine Guardian is standard and averts potential problems with timely intervention, while the Cool Fuel Module prevents vapor lock.
Repower Financing.
With Mercury Repower Financing, you can easily power up everything from fishing boats, to runabouts, to cruisers with flexible financing on the engine. You can also choose to finance rigging, gauges, controls and even labor. Mercury Repower Financing offers low rates and low monthly payments to fit a boater’s budget.
High Technology.
Long runner intakes pack more air into the chamber, while the advanced MPI system fine-tunes the fuel-to-air mix, producing more power on combustion. High performance aluminum cylinder heads improve mid-range acceleration. Optional SmartCraft® Digital Throttle & Shift provides silky-smooth operation.
Owners Manuals
Need an Owner’s Manual for your Mercury engine to perform maintenance, replace parts or just learn more about your engine? Mercury has made it easy for you to purchase a printed copy or to download and print your own copy. To order a printed version of the Service Manual for your particular Mercury Outboard or MerCruiser Engine.
Big Power From Little Gas.
These big blocks put all the power you want on the line when you need it – just the ticket for larger cruisers. The high-output alternator generates 65 percent more power than previous models. Yet the MPI and ECT systems also ensure maximum fuel economy. And these engines take 87-octane gas!
Corrosion Protection.
The MercFusion Paint System creates an outer seal against the elements, while MerCathode® provides automatic protection against galvanic corrosion. For maximum defense against saltwater effects, the SeaCore® industrial hardcoat anodizing system and closed-cooling circuit is available.
SPECS :
HP / kW
380 / 283
Maximum RPM (WOT)
4600 - 5000
Engine type
V8
Displacement (L)
8.2
Bore and stroke
4.47 x 4.00" / 113.5 x 101.6 mm
Compression ratio
8.75:1
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Engine control system
PCM 09 with SmartCraft CAN capability OBD-M diagnostics Dual oxygen sensors
Fuel delivery system
Multi-point Electronic Fuel Injection (MPI)
Air induction
High inertia induction system
Ignition
Distributorless ignition with knock control
Alternator amp / Watt
65 amp / 917 watt
Water drain system
Single point air actuated
Exhaust system
Tuned runner exhaust manifolds with 316 stainless steel tubular dry joint elbows
Cooling system
Brass sea water pump
Closed cooling
Long life 5-year antifreeze
Accessory drive system
Auto-tensioner
Serpentine belt
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine guardian system
SmartCraft Engine Guardian
Dimensions (L x W x H)
35 x 33 x 24" / 878 x 838 x 610 mm
Weight (engine only)
1,122 lbs / 509 kg
Compatible drives
Bravo One X
Bravo One XR
Bravo Three X
Bravo Three XR
Bravo Two X
Also you can check product : New Mercury 370 HP 6.2L Jet Inboard Engine - Sale !!
A high-displacement footprint allows the V-8s to work smarter – not harder – with lower max rpm to ensure longer engine life. Engine Guardian is standard and averts potential problems with timely intervention, while the Cool Fuel Module prevents vapor lock. Long runner intakes pack more air into the chamber, while the advanced MPI system fine-tunes the fuel-to-air mix, producing more power on combustion. High performance aluminum cylinder heads improve mid-range acceleration. Optional SmartCraft® Digital Throttle & Shift provides silky-smooth operation.
New Mercury 40hp 4 Stroke Jet Outboard Engine 40ELPT - Sale !! (40ELPT)
The Big Tiller
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
FourStroke Jet Outboards
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
SPECIFICATIONS - 40
HP / kW
40 / 29
Engine type
Inline 4
Displacement (CID/CC)
60.8 / 995
Full throttle RPM
5000-6000
Fuel induction system
2 valves per cylinder, single overhead cam (SOHC)
Alternator amp / Watt
18 amp / 226 watt
Recommended fuel
87 octane / up to 10% ethanol
Recommended oil
Mercury FourStroke Oil 10W-30
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Electric (turn-key)
Steering
Big Tiller
Remote
Tiller Kit
Shaft length
15" / 381 mm
Dry weight *Lightest model available
267 lbs / 121 kg
CARB star rating
3
Bore and stroke
2.56 x 2.95" / 65 x 75 mm
Ignition
ECM 07 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Gearcase options
Jet Drive
Trim system
Power Trim
Color
Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury ProKicker 25hp Four Stroke EFI Outboard Engine 25ELPT - Sale !!
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
FourStroke Jet Outboards
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
SPECIFICATIONS - 40
HP / kW
40 / 29
Engine type
Inline 4
Displacement (CID/CC)
60.8 / 995
Full throttle RPM
5000-6000
Fuel induction system
2 valves per cylinder, single overhead cam (SOHC)
Alternator amp / Watt
18 amp / 226 watt
Recommended fuel
87 octane / up to 10% ethanol
Recommended oil
Mercury FourStroke Oil 10W-30
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Electric (turn-key)
Steering
Big Tiller
Remote
Tiller Kit
Shaft length
15" / 381 mm
Dry weight *Lightest model available
267 lbs / 121 kg
CARB star rating
3
Bore and stroke
2.56 x 2.95" / 65 x 75 mm
Ignition
ECM 07 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Gearcase options
Jet Drive
Trim system
Power Trim
Color
Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury ProKicker 25hp Four Stroke EFI Outboard Engine 25ELPT - Sale !!
Mercury Jet Outboards are designed with the power and the weight to cover any shallow-water jet boat application. Our FourStroke jet outboards are electronic fuel injected, with a range from 25 to 80 horsepower.
The optional center-mounted Big Tiller offers optimal control for the 35hp and 40hp Jet. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.
New Mercury ProKicker 25hp Four Stroke EFI Outboard Engine 25ELPT - Sale !! (25ELPT)
Intuitive, Innovative Features
Exceptionally Smooth and Quiet
We balanced the powerhead to make it smoother and crafted soft-rubber mounts that isolate vibration and direct it away. Whether you’re fishing in a quiet cove or having a conversation, you’ll enjoy every minute on the water.
Easy to Maintain
Spend less time on service and more time on the water with our no-spill oil change system, easy-change gear lube and lifetime maintenance-free valve train.
Custom-Matched Prop
Big boats. Rough waters. No problem. A high-thrust four-blade propeller delivers enhanced trolling speed authority so you can dial in precise presentations every time.
Advanced Mercury Tiller
Port side or starboard, you pick the mounting location, and the tiller adapts to you. Its reversible throttle grip can be configured for control with either hand, while lateral adjustments ensure a convenient steering angle.
Power Tilt
No need to lean or strain to stow or deploy the engine. Mercury EFI-equipped ProKicker outboards come standard with power tilt.
SPECIFICATIONS :
Engine Type: Mercury 25ELPT ProKicker Inline 3 Four Stroke
Horsepower: 25hp
Cylinders: 3 cyl
Shaft Length: 20" Long
Steering: Remote Mechanical
Starting: Electric
Weight: 155 lbs
Alternator: 17 amp / 210 watt
Full Throttle Range: 5400 - 5800 rpm
Displacement: 500cc
Fuel System: Electronic Fuel Injection (EFI)
Fuel Induction System: 6-valve, SOHC
Warranty: Mercury Marine 3-Year Warranty
STANDARD FEATURES
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury ProKicker 15hp Four Stroke EFI Outboard Engine 15EXLPT - Sale !!
Exceptionally Smooth and Quiet
We balanced the powerhead to make it smoother and crafted soft-rubber mounts that isolate vibration and direct it away. Whether you’re fishing in a quiet cove or having a conversation, you’ll enjoy every minute on the water.
Easy to Maintain
Spend less time on service and more time on the water with our no-spill oil change system, easy-change gear lube and lifetime maintenance-free valve train.
Custom-Matched Prop
Big boats. Rough waters. No problem. A high-thrust four-blade propeller delivers enhanced trolling speed authority so you can dial in precise presentations every time.
Advanced Mercury Tiller
Port side or starboard, you pick the mounting location, and the tiller adapts to you. Its reversible throttle grip can be configured for control with either hand, while lateral adjustments ensure a convenient steering angle.
Power Tilt
No need to lean or strain to stow or deploy the engine. Mercury EFI-equipped ProKicker outboards come standard with power tilt.
SPECIFICATIONS :
Engine Type: Mercury 25ELPT ProKicker Inline 3 Four Stroke
Horsepower: 25hp
Cylinders: 3 cyl
Shaft Length: 20" Long
Steering: Remote Mechanical
Starting: Electric
Weight: 155 lbs
Alternator: 17 amp / 210 watt
Full Throttle Range: 5400 - 5800 rpm
Displacement: 500cc
Fuel System: Electronic Fuel Injection (EFI)
Fuel Induction System: 6-valve, SOHC
Warranty: Mercury Marine 3-Year Warranty
STANDARD FEATURES
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury ProKicker 15hp Four Stroke EFI Outboard Engine 15EXLPT - Sale !!
Mercury ProKicker outboards enable precision boat control, even in the toughest fishing conditions. Quiet, smooth and efficient, they make long hours of trolling more productive – and more enjoyable.
New Mercury 230 HP 3.0L Inboard Diesel Engine - Sale !! (Mercury 230 HP)
Easy-to-Maintain
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
Redefining the Standard.
The new Mercury Diesel 3.0L common-rail high-speed engine delivers exceptional performance and offers substantial improvements in acceleration and top speed – all made possible by a new water-cooled variable geometry turbocharger design (VGT). This matched system, plus a state-of-the-art engine control system, provides reduced time to plane and outstanding overall performance.
Reliability Performance.
Enjoying your time on the water is more easily achieved with an engine that performs day in and day out. Mercury Diesel’s 3.0L engine is assembled in a state-of-the-art manufacturing facility that employs the latest in quality practices and control, ensuring ultimate confidence in reliability. Combine the reliability and performance of the Mercury Diesel 3.0L with Mercury’s proprietary SmartCraft system and a full suite of accessories that contribute to an unsurpassed boating experience.
Quiet Performer.
The Mercury Diesel 3.0L delivers exhilarating performance while minimizing noise and vibration, while the air filter doubles as a silencer that removes the turbo whine historically associated with diesel engines. The motor mounts are designed to minimize vibration. Having a conversation while cruising has never been easier.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Turbocharger Cooling: Closed cooled | Stop: ECU Controlled | Control Unit (ECU): Bosch EDC17
Engine Type V6
Engine Power 230 HP
Displacement 3.0 L
Cylinder Liners Valves per Cylinder: 4
Throttle Maximum (WOT): 4200 RPM | Peak Torque: 503 Nm @ 2200 rpm | and shift: Mercury DTS or Mechanical Cable
Bore 3.27" (83 mm)
Stroke 6.62" (92 mm)
Cooling Coolers: Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell
Compression Ratio 16.5:1
Gauges Helm and gauge compatibility: Mercury SmartCraft
Electric
Electrical System: 12 V, 110 A w/ conveniently located battery power and ground studs
Fuel System
Fuel System High pressure common rail
Dimensions
Length 36.6" (931 mm)
Width 33.5" (851 mm)
Height 30.0" (784 mm)
Dimensions Seawater pump inlet size: 1.5 in (38 mm) | Flywheel size: 11.42 in (290 mm) SAE 8
Capacities
Volume Oil sump: 8.5 L | Coolant: 12 L
Weights
Dry Weight 767 lbs (348 Kg)
FEATURES :
Air Handling: Turbocharged and Aftercooled l Rotation: Counter clockwise facing flywheel l Fuel lift pump: On engine l High pressure fuel pump: Bosch CP 4.2 w/ integrated gear lift pump l Pistons: Oil jet cooled l Fuel injectors: Bosch CRS 2.20 (Solenoid) l Glow Plugs: Standard equipment with Bosch glow plug control unit (GCU) | Air inlet (Starboard Rear): Filtered and silenced l Turbocharger: Honeywell VGT l Dipstick range: 1.0 L l Oil maintenance interval: 200 hours or annually l Mercury Joystick Piloting: Compatible with Joystick Piloting for Inboards l Sensors: Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure
Also you can check product : New Mercury 150 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
Redefining the Standard.
The new Mercury Diesel 3.0L common-rail high-speed engine delivers exceptional performance and offers substantial improvements in acceleration and top speed – all made possible by a new water-cooled variable geometry turbocharger design (VGT). This matched system, plus a state-of-the-art engine control system, provides reduced time to plane and outstanding overall performance.
Reliability Performance.
Enjoying your time on the water is more easily achieved with an engine that performs day in and day out. Mercury Diesel’s 3.0L engine is assembled in a state-of-the-art manufacturing facility that employs the latest in quality practices and control, ensuring ultimate confidence in reliability. Combine the reliability and performance of the Mercury Diesel 3.0L with Mercury’s proprietary SmartCraft system and a full suite of accessories that contribute to an unsurpassed boating experience.
Quiet Performer.
The Mercury Diesel 3.0L delivers exhilarating performance while minimizing noise and vibration, while the air filter doubles as a silencer that removes the turbo whine historically associated with diesel engines. The motor mounts are designed to minimize vibration. Having a conversation while cruising has never been easier.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Turbocharger Cooling: Closed cooled | Stop: ECU Controlled | Control Unit (ECU): Bosch EDC17
Engine Type V6
Engine Power 230 HP
Displacement 3.0 L
Cylinder Liners Valves per Cylinder: 4
Throttle Maximum (WOT): 4200 RPM | Peak Torque: 503 Nm @ 2200 rpm | and shift: Mercury DTS or Mechanical Cable
Bore 3.27" (83 mm)
Stroke 6.62" (92 mm)
Cooling Coolers: Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell
Compression Ratio 16.5:1
Gauges Helm and gauge compatibility: Mercury SmartCraft
Electric
Electrical System: 12 V, 110 A w/ conveniently located battery power and ground studs
Fuel System
Fuel System High pressure common rail
Dimensions
Length 36.6" (931 mm)
Width 33.5" (851 mm)
Height 30.0" (784 mm)
Dimensions Seawater pump inlet size: 1.5 in (38 mm) | Flywheel size: 11.42 in (290 mm) SAE 8
Capacities
Volume Oil sump: 8.5 L | Coolant: 12 L
Weights
Dry Weight 767 lbs (348 Kg)
FEATURES :
Air Handling: Turbocharged and Aftercooled l Rotation: Counter clockwise facing flywheel l Fuel lift pump: On engine l High pressure fuel pump: Bosch CP 4.2 w/ integrated gear lift pump l Pistons: Oil jet cooled l Fuel injectors: Bosch CRS 2.20 (Solenoid) l Glow Plugs: Standard equipment with Bosch glow plug control unit (GCU) | Air inlet (Starboard Rear): Filtered and silenced l Turbocharger: Honeywell VGT l Dipstick range: 1.0 L l Oil maintenance interval: 200 hours or annually l Mercury Joystick Piloting: Compatible with Joystick Piloting for Inboards l Sensors: Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure
Also you can check product : New Mercury 150 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
New Mercury 80hp 4 Stroke Jet Outboard Engine 80ELPT - Sale !! (80ELPT)
The Mercury Jet is designed to get you through some of the most challenging waters anywhere. Specifically engineered to propel boats in shallow water where traditional outboards are unable to operate, Mercury outboard jets replace the gear case with a jet pump that sits even with the bottom of the boat and provides you with the ability to go wherever the fish or fowl are.
Mercury outboards are also the power of choice for rescue boats, providing a secure environment around the engine. No matter the adventure, a Mercury Jet outboard will get you there. The Mercury Jet stainless impeller improves performance and withstands harsh, abrasive debris that can be drawn through the pump, such as sand and shells. That ability adds to long-term durability and reliability.
SPECS:
Engine
Engine Power 80 HP (60 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 2.1 L
Throttle RPM: 5000-6000
Oil Type Recommended: Mercury FourStroke Oil 10W-30
Gear Ratio (Primary) 1.00:1 | Shift: F-N-R
Emissions CARB star rating: 3
Bore 3.5" (90 mm)
Stroke 3.2" (81 mm)
Lubrication Integrated Dry Sump
Ignition SmartCraft ECM 70 Digital Inductive
Steering Big Tiller Compatible/Dual cable mechanical/Hydraulic
Cooling Water-cooled with thermostat
Exhaust Through jet
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range: 70° (-6° to 64°)
Electric
Alternator 35 amp / 441 watt with water-cooled voltage regulator
Starter Smart Start Electric
Fuel System
Fuel System induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Dimensions
Length Shaft: 20" (508 mm)
Capacities
Oil capacity 5.5 qts (5.2 l)
Weights
Dry Weight Lightest model available: 378 lbs (171 kg)
Features
Engine protection operator warning system: SmartCraft Engine Guardian | Shallow water trim range (degrees): 20
Color
Colors Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury 40HP SeaPro Command Thrust 40ELHPT Outboard Engine - Sale !!
Mercury outboards are also the power of choice for rescue boats, providing a secure environment around the engine. No matter the adventure, a Mercury Jet outboard will get you there. The Mercury Jet stainless impeller improves performance and withstands harsh, abrasive debris that can be drawn through the pump, such as sand and shells. That ability adds to long-term durability and reliability.
SPECS:
Engine
Engine Power 80 HP (60 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 2.1 L
Throttle RPM: 5000-6000
Oil Type Recommended: Mercury FourStroke Oil 10W-30
Gear Ratio (Primary) 1.00:1 | Shift: F-N-R
Emissions CARB star rating: 3
Bore 3.5" (90 mm)
Stroke 3.2" (81 mm)
Lubrication Integrated Dry Sump
Ignition SmartCraft ECM 70 Digital Inductive
Steering Big Tiller Compatible/Dual cable mechanical/Hydraulic
Cooling Water-cooled with thermostat
Exhaust Through jet
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range: 70° (-6° to 64°)
Electric
Alternator 35 amp / 441 watt with water-cooled voltage regulator
Starter Smart Start Electric
Fuel System
Fuel System induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Dimensions
Length Shaft: 20" (508 mm)
Capacities
Oil capacity 5.5 qts (5.2 l)
Weights
Dry Weight Lightest model available: 378 lbs (171 kg)
Features
Engine protection operator warning system: SmartCraft Engine Guardian | Shallow water trim range (degrees): 20
Color
Colors Phantom Black
STANDARD FEATURES :
Power Trim & Tilt
Service Tool Kit & Parts
Stop Switch Lanyard
Owner's Manual
Also you can check product : New Mercury 40HP SeaPro Command Thrust 40ELHPT Outboard Engine - Sale !!
The Mercury Jet is designed to get you through some of the most challenging waters anywhere. Specifically engineered to propel boats in shallow water where traditional outboards are unable to operate, Mercury outboard jets replace the gear case with a jet pump that sits even with the bottom of the boat and provides you with the ability to go wherever the fish or fowl are.
New Mercury 175HP 3.0L Outboard Diesel Engine - Sale !! (Mercury 3.0L Diesel)
Mercury 175HP 3.0L Outboard Diesel Engine
A two-stage direct-injection system uses a small charge of compressed air to finely atomize the diesel fuel as it injects it into the combustion chamber. Atomizing the fuel into a fine mist allows for ignition via spark to occur while delivering enhanced high rpm running quality. A glow plug works in concert with the spark plug for improved cold weather starting and idle quality. An on-board Propulsion Control Module (PCM) microprocessor optimizes fuel and spark timing for improved running quality and performance throughout the engine's operating range. SmartCraft® Engine Guardian provides real-time, self-protection engine fault diagnostics and messaging.
Key Features
Available with a 25” (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
Also you can check product : New Mercury Diesel 115 HP 2.0L Inboard Diesel Engine - Sale !!
A two-stage direct-injection system uses a small charge of compressed air to finely atomize the diesel fuel as it injects it into the combustion chamber. Atomizing the fuel into a fine mist allows for ignition via spark to occur while delivering enhanced high rpm running quality. A glow plug works in concert with the spark plug for improved cold weather starting and idle quality. An on-board Propulsion Control Module (PCM) microprocessor optimizes fuel and spark timing for improved running quality and performance throughout the engine's operating range. SmartCraft® Engine Guardian provides real-time, self-protection engine fault diagnostics and messaging.
Key Features
Available with a 25” (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
Also you can check product : New Mercury Diesel 115 HP 2.0L Inboard Diesel Engine - Sale !!
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
New Mercury 350 HP ECT 6.2L Inboard Engine - Sale !! (Mercury MerCruiser 350 HP ECT)
Rethink the V-8.
We certainly did. Everything, part by part, system by system, with a total design and engineering commitment to marine use. The result? A whole new sporty feel at the wheel. Significant reductions in sound and vibration at the helm. Major improvements in the cockpit environment, by design. All wrapped in the legendary reliability you’ve come to expect from Mercury.®
Powerful Performer.
Power and acceleration is delivered with 6.2 liters of displacement and a long-runner scroll intake manifold that optimizes air flow for higher torque.
Sporty Handling.
Adaptive Speed Control maintains rpm during hard turns, creating a sportier, more intuitive driving experience without needless throttle adjustments.
Quiet Ride.
An unmatched boating experience thanks to an intake resonator and aft-facing throttle body that work together to dramatically reduce noise, while directing the engine sound away from the cockpit.
Smooth Operator.
Front and rear engine mounts isolate vibration for a smooth, quiet performance.
Easy To Maintain.
Accessible, easy-to-reach, color-coded maintenance points.
SPECS :
Engine
Engine Control system: Standard SmartCraft with Electronic Throttle Control
Engine Power 350 HP (261 KW)
Engine Type V8, 2-valve/cylinder pushrod
Displacement 377 CID (6.2 L)
Throttle RPM (WOT): 5000 - 5400
Oil Type Recommended: NMMA Certified FCW 25W-40 Synthetic Blend
Bore 4.0" (101.6 mm)
Stroke 3.75" (95.25 mm)
Exhaust Through prop
Ignition SmartCraft PCM 112 Digital Inductive
Fuel System
Fuel System Delivery: Computer controlled Multi-Port Electronic Fuel Injection (MPI)
Lights and Safety
Security System Engine guardian system: SmartCraft Engine Guardian
Dimensions
Length 32" (813 mm)
Width 30" (762 mm)
Height 22" (559 mm)
Weights
Dry Weight Engine only: 862 lbs (391 kg)
Features
Air induction: Performance-Tuned Scroll Intake Manifold l Water drain system: Air Actuated "Season Extender" l Cooling: Water-cooled with thermostat l Fuel requirement: 90 RON 10% Ethanol Maximum / Unleaded Regular 87 Octane Minimum (R M/2) l Lubrication system: Integrated wet sump
Also you can check product : New Mercury 150 HP SeaPro 150XL Commercial Outboard Engine - Sale !!
We certainly did. Everything, part by part, system by system, with a total design and engineering commitment to marine use. The result? A whole new sporty feel at the wheel. Significant reductions in sound and vibration at the helm. Major improvements in the cockpit environment, by design. All wrapped in the legendary reliability you’ve come to expect from Mercury.®
Powerful Performer.
Power and acceleration is delivered with 6.2 liters of displacement and a long-runner scroll intake manifold that optimizes air flow for higher torque.
Sporty Handling.
Adaptive Speed Control maintains rpm during hard turns, creating a sportier, more intuitive driving experience without needless throttle adjustments.
Quiet Ride.
An unmatched boating experience thanks to an intake resonator and aft-facing throttle body that work together to dramatically reduce noise, while directing the engine sound away from the cockpit.
Smooth Operator.
Front and rear engine mounts isolate vibration for a smooth, quiet performance.
Easy To Maintain.
Accessible, easy-to-reach, color-coded maintenance points.
SPECS :
Engine
Engine Control system: Standard SmartCraft with Electronic Throttle Control
Engine Power 350 HP (261 KW)
Engine Type V8, 2-valve/cylinder pushrod
Displacement 377 CID (6.2 L)
Throttle RPM (WOT): 5000 - 5400
Oil Type Recommended: NMMA Certified FCW 25W-40 Synthetic Blend
Bore 4.0" (101.6 mm)
Stroke 3.75" (95.25 mm)
Exhaust Through prop
Ignition SmartCraft PCM 112 Digital Inductive
Fuel System
Fuel System Delivery: Computer controlled Multi-Port Electronic Fuel Injection (MPI)
Lights and Safety
Security System Engine guardian system: SmartCraft Engine Guardian
Dimensions
Length 32" (813 mm)
Width 30" (762 mm)
Height 22" (559 mm)
Weights
Dry Weight Engine only: 862 lbs (391 kg)
Features
Air induction: Performance-Tuned Scroll Intake Manifold l Water drain system: Air Actuated "Season Extender" l Cooling: Water-cooled with thermostat l Fuel requirement: 90 RON 10% Ethanol Maximum / Unleaded Regular 87 Octane Minimum (R M/2) l Lubrication system: Integrated wet sump
Also you can check product : New Mercury 150 HP SeaPro 150XL Commercial Outboard Engine - Sale !!
A 6.2-liter V-8 engine with unparalleled torque and acceleration to get you on plane quickly and smoothly. Power and acceleration is delivered with 6.2 liters of displacement and a long-runner scroll intake manifold that optimizes air flow for higher torque. A 6.2-liter V-8 engine with unparalleled torque and acceleration to get you on plane quickly and smoothly.
New Mercury Diesel 130 HP 2.0L Inboard Diesel Engine - Sale !! (130 HP)
Clean, Quiet, Efficient.
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Many features available to make your tow sport adventures even more amazing
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
TDI is a registered trademark of Volkswagen Aktiengesellschaft
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury® SmartCraft® compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore® system is available for the ultimate in saltwater protection.
SPECS :
Power mhp / kW
131.8 / 97
Bore and stroke
3.27 x 3.62" / 83 x 92 mm
Maximum RPM (WOT)
4000
Engine type
Inline 4
Displacement (L)
2.0
Dimensions (L x W x H)
32 x 30 x 29" / 802 x 710 x 727 mm
Weight (engine only)
551 lbs / 250 kg
Weight (incl. transmission)
606 lbs / 275 kg
Weight - Alpha
732 lbs / 332 kg
Weight - Bravo One
771 lbs / 350 kg
Weight - Bravo Two
783 lbs / 355 kg
Weight - Bravo Three
791 lbs / 359 kg
Fuel consumption
7.6 gal/hr / 28.7 l/hr @ 4000 rpm
Compatible drives
Alpha
Emission
BSO 2 RCD 2 IMO 2 EPA Tier 3
EPA Tier 2 BSO 2 RCD 2 IMO 2
Also you can check product : New Mercury 80hp 4 Stroke Jet Outboard Engine 80ELPT - Sale !!
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Many features available to make your tow sport adventures even more amazing
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
TDI is a registered trademark of Volkswagen Aktiengesellschaft
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury® SmartCraft® compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore® system is available for the ultimate in saltwater protection.
SPECS :
Power mhp / kW
131.8 / 97
Bore and stroke
3.27 x 3.62" / 83 x 92 mm
Maximum RPM (WOT)
4000
Engine type
Inline 4
Displacement (L)
2.0
Dimensions (L x W x H)
32 x 30 x 29" / 802 x 710 x 727 mm
Weight (engine only)
551 lbs / 250 kg
Weight (incl. transmission)
606 lbs / 275 kg
Weight - Alpha
732 lbs / 332 kg
Weight - Bravo One
771 lbs / 350 kg
Weight - Bravo Two
783 lbs / 355 kg
Weight - Bravo Three
791 lbs / 359 kg
Fuel consumption
7.6 gal/hr / 28.7 l/hr @ 4000 rpm
Compatible drives
Alpha
Emission
BSO 2 RCD 2 IMO 2 EPA Tier 3
EPA Tier 2 BSO 2 RCD 2 IMO 2
Also you can check product : New Mercury 80hp 4 Stroke Jet Outboard Engine 80ELPT - Sale !!
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
New Mercury 150 TIER 3 152.1 HP 2.0L Inboard Diesel Engine - Sale !! (Merccury 150 TIER 3)
Robust and Reliable
Combines reliable power with a compact, robust design.
Clean, Quiet, Efficient.
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury SmartCraft compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore® system is available for the ultimate in saltwater protection.
SPECS :
Power mhp / kW
152.1 / 112
Bore and stroke
3.27 x 3.62" / 83 x 92 mm
Maximum RPM (WOT)
4000
Engine type
Inline
Displacement (L)
2.0
Dimensions (L x W x H)
32 x 30 x 30" / 802 x 710 x 757 mm
Weight (engine only)
582 lbs / 264 kg
Weight (incl. transmission)
637 lbs / 289 kg
Weight - Alpha
763 lbs / 346 kg
Weight - Bravo One
802 lbs / 364 kg
Weight - Bravo Two
814 lbs / 369 kg
Weight - Bravo Three
822 lbs / 373 kg
Fuel consumption
8.5 gal/hr / 32.3 l/hr @ 4000 rpm
Compatible drives
Alpha
Emission
BSO 2 RCD 2 IMO 2 EPA Tier 3
Compatible with SmartCraft digital technology
Yes
Also you can check product : New Mercury Diesel 130 HP 2.0L Inboard Diesel Engine - Sale !!
Combines reliable power with a compact, robust design.
Clean, Quiet, Efficient.
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury SmartCraft compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore® system is available for the ultimate in saltwater protection.
SPECS :
Power mhp / kW
152.1 / 112
Bore and stroke
3.27 x 3.62" / 83 x 92 mm
Maximum RPM (WOT)
4000
Engine type
Inline
Displacement (L)
2.0
Dimensions (L x W x H)
32 x 30 x 30" / 802 x 710 x 757 mm
Weight (engine only)
582 lbs / 264 kg
Weight (incl. transmission)
637 lbs / 289 kg
Weight - Alpha
763 lbs / 346 kg
Weight - Bravo One
802 lbs / 364 kg
Weight - Bravo Two
814 lbs / 369 kg
Weight - Bravo Three
822 lbs / 373 kg
Fuel consumption
8.5 gal/hr / 32.3 l/hr @ 4000 rpm
Compatible drives
Alpha
Emission
BSO 2 RCD 2 IMO 2 EPA Tier 3
Compatible with SmartCraft digital technology
Yes
Also you can check product : New Mercury Diesel 130 HP 2.0L Inboard Diesel Engine - Sale !!
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
New Mercury 150 HP SeaPro 150XL Commercial Outboard Engine - Sale !! (150XL)
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
Ultra-compact. Ultra-efficient. Ultra-durable. A motor that works hard all day long, day after day, in the toughest conditions. For commercial fishing vessels, commercial workboats and law-enforcement boats.
Features
MERCURY SEAPRO ENGINES EXCEL IN THAILAND: Sakchai Homsub and his team are out on the water 365 days a year, bringing tourists around the islands surrounding Pattaya, Thailand. As his customers rely on him, he counts on his SeaPro engines to deliver the performance required to take them out on the water day in, day out.
HARSH CONDITIONS CAN’T DETER SEAPRO: TowBoatUS and commercial boat builders turn to Mercury Marine’s SeaPro engines because they’re engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done.
THE MERCURY EDGE: ANTI-CORROSION PROTECTION: Mercury SeaPro four-stroke outboards offer superior protection against corrosion with the industry's lowest-copper aluminum alloy. And the life of critical components is extended with more stainless steel.
SPECS :
Engine
Engine Power 150 HP (110 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 3.0 L
Throttle Full RPM: 4800-5300
Oil Type Recommended: NMMA Certified FCW 25W-40 Synthetic Blend
Gear Ratio (Primary) 1.92:1 | Shift: F-N-R
Emissions CARB Star Rating: 3
Bore 4.0" (102 mm)
Stroke 3.6" (92 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 70 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Dual cable mechanical | Electro-Hydraulic Power Steering Optional on Duals | Hydraulic power steering
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range:73° (-6° to 67°)
Electric
Alternator (Belt-Driven): 60 amp / 756 watt
Starter Electric (turn-key) l Smart Start Electric
Fuel System
Fuel System Electronic Fuel Injection (EFI) l Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length 20" (508 mm) l 25" (635 mm)
Capacities
Oil capacity 6.3 qts (6.0 l)
Weights
Dry Weight Lightest model available: 455 lbs (206 kg)
Features
Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Mechanical throttle & shift l Trim system: Power Tilt/Power Trim l Counter Rotation: Available
Color
Colors Phantom Black
Also you can check product : New Mercury 115HP PRO XS 115ELPT Pro XS Outboard Engine - Sale !!
Ultra-compact. Ultra-efficient. Ultra-durable. A motor that works hard all day long, day after day, in the toughest conditions. For commercial fishing vessels, commercial workboats and law-enforcement boats.
Features
MERCURY SEAPRO ENGINES EXCEL IN THAILAND: Sakchai Homsub and his team are out on the water 365 days a year, bringing tourists around the islands surrounding Pattaya, Thailand. As his customers rely on him, he counts on his SeaPro engines to deliver the performance required to take them out on the water day in, day out.
HARSH CONDITIONS CAN’T DETER SEAPRO: TowBoatUS and commercial boat builders turn to Mercury Marine’s SeaPro engines because they’re engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done.
THE MERCURY EDGE: ANTI-CORROSION PROTECTION: Mercury SeaPro four-stroke outboards offer superior protection against corrosion with the industry's lowest-copper aluminum alloy. And the life of critical components is extended with more stainless steel.
SPECS :
Engine
Engine Power 150 HP (110 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 3.0 L
Throttle Full RPM: 4800-5300
Oil Type Recommended: NMMA Certified FCW 25W-40 Synthetic Blend
Gear Ratio (Primary) 1.92:1 | Shift: F-N-R
Emissions CARB Star Rating: 3
Bore 4.0" (102 mm)
Stroke 3.6" (92 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 70 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Dual cable mechanical | Electro-Hydraulic Power Steering Optional on Duals | Hydraulic power steering
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range:73° (-6° to 67°)
Electric
Alternator (Belt-Driven): 60 amp / 756 watt
Starter Electric (turn-key) l Smart Start Electric
Fuel System
Fuel System Electronic Fuel Injection (EFI) l Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length 20" (508 mm) l 25" (635 mm)
Capacities
Oil capacity 6.3 qts (6.0 l)
Weights
Dry Weight Lightest model available: 455 lbs (206 kg)
Features
Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Mechanical throttle & shift l Trim system: Power Tilt/Power Trim l Counter Rotation: Available
Color
Colors Phantom Black
Also you can check product : New Mercury 115HP PRO XS 115ELPT Pro XS Outboard Engine - Sale !!
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
New Mercury Avator 110e Electric Outboard Motor - Sale !! (Mercury Avator 110e)
Intuitive, Innovative Features
Modular Batteries
Avator 75e and 110e outboards can be configured with up to four 5400Wh batteries, all connected through the 5400 Power Center for seamless integration and convenient single-point charging.
Tiller Handle
The available tiller for the Avator 75e allows boaters to take control with confidence. The handle adjusts up and down for comfortable steering from any position, incorporates an integrated tilt switch and digital shift controls, and folds up when not in use.
Power Tilt
The power tilt system makes it easy to dial in performance or raise the outboard in shallow water. You can adjust tilt effortlessly for maximum efficiency and performance.
5400 Power Center
The 5400 Power Center is an integrated hub that distributes power from the battery bank throughout the system. It can also charge up to four connected batteries simultaneously from a single charging port.
Digital Controls
For console boats, digital remote controls deliver instant throttle response, confident shifting, and power tilt control with zero hesitation for easy, safe piloting. Controls are available in three styles to fit a range of center- and side-console mounting positions.
Strong Transverse Flux Motor
Industry-first transverse flux motor technology delivers immediate torque and reliable, efficient power. The motor turns a high-thrust three-blade aluminum prop that further optimizes battery life.
Avator Performance Data
Smooth & Quiet
Smooth, quiet electric power will get you where you’re going without interrupting the conversation.
Superior Efficiency
From the transverse flux motor to the lithium-ion batteries, we’ve optimized every aspect of the Avator propulsion system to deliver more efficient overall performance.
More Power, Bigger Adventures
The power of the Avator 75e and 110e outboards make them ideal for use on larger and heavier vessels, including medium-sized aluminum fishing boats and pontoons.
Avator Advantage
Smooth Performance
Vibration-isolating components help ensure your ride is quiet and smooth, keeping you better connected with nature.
Sustainability
Avator outboards transform the boating experience by making boating possible with no exhaust fumes and zero direct emissions.
Corrosion Resistance
Every Avator outboard is engineered with proven corrosion-preventive materials and coatings, so you can boat confidently in freshwater or saltwater.
Easy Storage and Maintenance
With no fuel, no fumes and minimal maintenance, an Avator outboard is simple to own so you can spend your time on the water.
Specifications
Battery IP Rating
IP67
Battery Weight
93 lbs
Battery
5376Wh - LiFePO4
Charger Options
520W; 1050W
Input Power
12.8kW
Rated Prop Shaft Power
11000W
Rated Voltage
48V
Shaft Length
20 in / 508 mm; 25 in / 635 mm
Propeller Options
8P; 9P; 10.5P
Steering
RC
Total Drive Weight
124 lbs
Avator Accessories and Connected Devices
Avator Displays
Monitor your propulsion system and adjust settings from a vivid full-color display. On tiller models, the display is integrated with the outboard. Dash displays are available for boats with console steering.
SmartCraft Connect Mobile and the Mercury Marine App
A Mercury SmartCraft® Connect Mobile module comes pre-installed, allowing you to wirelessly connect your outboard to the Mercury Marine app. Use the app to access performance data, see visualized range estimates, connect with your dealer and more. You can even use the app to wirelessly update your Avator system, ensuring you always have the latest features.
Choose Your Charge Time
The portable 520W Avator charger can recharge two depleted 5400Wh batteries in approximately 20 hours. The vessel-integrated 1kW charger can cut the charge time by more than 50 percent.
Accessories :
Carrying bag
Props
Chargers
Also you can check product : New Mercury Avator 75e Electric Outboard Motor - Sale !!
Modular Batteries
Avator 75e and 110e outboards can be configured with up to four 5400Wh batteries, all connected through the 5400 Power Center for seamless integration and convenient single-point charging.
Tiller Handle
The available tiller for the Avator 75e allows boaters to take control with confidence. The handle adjusts up and down for comfortable steering from any position, incorporates an integrated tilt switch and digital shift controls, and folds up when not in use.
Power Tilt
The power tilt system makes it easy to dial in performance or raise the outboard in shallow water. You can adjust tilt effortlessly for maximum efficiency and performance.
5400 Power Center
The 5400 Power Center is an integrated hub that distributes power from the battery bank throughout the system. It can also charge up to four connected batteries simultaneously from a single charging port.
Digital Controls
For console boats, digital remote controls deliver instant throttle response, confident shifting, and power tilt control with zero hesitation for easy, safe piloting. Controls are available in three styles to fit a range of center- and side-console mounting positions.
Strong Transverse Flux Motor
Industry-first transverse flux motor technology delivers immediate torque and reliable, efficient power. The motor turns a high-thrust three-blade aluminum prop that further optimizes battery life.
Avator Performance Data
Smooth & Quiet
Smooth, quiet electric power will get you where you’re going without interrupting the conversation.
Superior Efficiency
From the transverse flux motor to the lithium-ion batteries, we’ve optimized every aspect of the Avator propulsion system to deliver more efficient overall performance.
More Power, Bigger Adventures
The power of the Avator 75e and 110e outboards make them ideal for use on larger and heavier vessels, including medium-sized aluminum fishing boats and pontoons.
Avator Advantage
Smooth Performance
Vibration-isolating components help ensure your ride is quiet and smooth, keeping you better connected with nature.
Sustainability
Avator outboards transform the boating experience by making boating possible with no exhaust fumes and zero direct emissions.
Corrosion Resistance
Every Avator outboard is engineered with proven corrosion-preventive materials and coatings, so you can boat confidently in freshwater or saltwater.
Easy Storage and Maintenance
With no fuel, no fumes and minimal maintenance, an Avator outboard is simple to own so you can spend your time on the water.
Specifications
Battery IP Rating
IP67
Battery Weight
93 lbs
Battery
5376Wh - LiFePO4
Charger Options
520W; 1050W
Input Power
12.8kW
Rated Prop Shaft Power
11000W
Rated Voltage
48V
Shaft Length
20 in / 508 mm; 25 in / 635 mm
Propeller Options
8P; 9P; 10.5P
Steering
RC
Total Drive Weight
124 lbs
Avator Accessories and Connected Devices
Avator Displays
Monitor your propulsion system and adjust settings from a vivid full-color display. On tiller models, the display is integrated with the outboard. Dash displays are available for boats with console steering.
SmartCraft Connect Mobile and the Mercury Marine App
A Mercury SmartCraft® Connect Mobile module comes pre-installed, allowing you to wirelessly connect your outboard to the Mercury Marine app. Use the app to access performance data, see visualized range estimates, connect with your dealer and more. You can even use the app to wirelessly update your Avator system, ensuring you always have the latest features.
Choose Your Charge Time
The portable 520W Avator charger can recharge two depleted 5400Wh batteries in approximately 20 hours. The vessel-integrated 1kW charger can cut the charge time by more than 50 percent.
Accessories :
Carrying bag
Props
Chargers
Also you can check product : New Mercury Avator 75e Electric Outboard Motor - Sale !!
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.Modular batteries and multiple controls, displays and chargers make it easy to optimize your Avator 20e or 35e propulsion system for wherever your imagination leads you.
New Mercury 250 HP ECT 4.5L Inboard Engine - Sale !! (Mercury 250 HP ECT)
Built for Marine
Designing a V-6 block solely for marine use allows Mercury to build the 4.5L with the ultimate protection system, using cast-iron componentry where the engine intersects with seawater, and using corrosion-resistant aluminum and composites everywhere else.
Repower Financing.
With Mercury Repower Financing, you can easily power up everything from fishing boats, to runabouts, to cruisers with flexible financing on the engine. You can also choose to finance rigging, gauges, controls and even labor. Mercury Repower Financing offers low rates and low monthly payments to fit a boater’s budget.
Owners Manuals
Need an Owner’s Manual for your Mercury engine to perform maintenance, replace parts or just learn more about your engine? Mercury has made it easy for you to purchase a printed copy or to download and print your own copy. To order a printed version of the Service Manual for your particular Mercury Outboard or MerCruiser Engine.
Powerful Performer.
Thanks to its new, long-runner scroll intake manifold which draws in more air and converts it into additional torque, the 4.5L delivers a ground-breaking power-to-weight ratio and gives you V-8 power in a V-6 package.
Smooth & Quiet.
The 4.5L’s newly designed rear-facing throttle body, anti-whistle throttle plate, engine cover and mounts, lightweight flywheel, fuel-supply module, and structural oil pan all work together to deliver a superior idle, smoothness and low vibration. Resulting in an exceptional driving experience.
Corrosion Protection.
The MercFusion Paint System creates an outer seal against the elements, while MerCathode® provides automatic protection against galvanic corrosion. For maximum defense against saltwater effects, the SeaCore® industrial hardcoat anodizing system and closed-cooling circuit is available.
Sporty Handling.
The 4.5L comes standard with Adaptive Speed Control, which automatically maintains engine rpm regardless of load or water conditions. The result is increased throttle response and a sporty feel.
Easy to Maintain.
When service is required, maintenance is a snap with the front-mounted drive lube monitor, color-coded maintenance points – including easy-to-reach oil filter and fill – and “how-to” videos that can be accessed via the QR code on the label.
SPECS:
HP / kW
250 / 184
Maximum RPM (WOT)
4800-5200
Engine type
V6, 2-valve/cylinder pushrod
Displacement (L)
4.5
Displacement (CID/L)
275 / 4.5
Bore and stroke
4.0 x 3.6" / 102 x 92 mm
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol
Maximum
Fuel ethanol tolerance
Up to 10%
Fuel requirement
90 RON 10% Ethanol Maximum
Unleaded Regular 87 Octane Minimum (R M/2)
Engine control system
Mechanical Shifting with Optional SmartCraft DTS
Standard SmartCraft with Electronic Throttle Control
Fuel delivery system
Computer controlled Multi-Port Electronic Fuel Injection (MPI)
Air induction
Performance-Tuned Scroll Intake Manifold
Ignition
SmartCraft PCM 112 Digital Inductive
Alternator amp / Watt
70 amp / 882 watt (Belt-Driven)
Water drain system
Air Actuated "Season Extender" (Bravo)
Easy Drain "Season Extender" (Alpha)
Exhaust system
Through prop
Cooling system
Water cooled with thermostat; FWC available as factory option (Alpha) and packaged with SeaCore Drive (Bravo)
Lubrication system
Integrated wet sump
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine guardian system
SmartCraft Engine Guardian
Dimensions (L x W x H)
28 x 30 x 22" / 696 x 740 x 559 mm
Weight (engine only)
761 lbs / 345 kg
Compatible drives
Alpha
Bravo One
Bravo Three
Bravo Two
Also you can check product : New Mercury 230 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
Designing a V-6 block solely for marine use allows Mercury to build the 4.5L with the ultimate protection system, using cast-iron componentry where the engine intersects with seawater, and using corrosion-resistant aluminum and composites everywhere else.
Repower Financing.
With Mercury Repower Financing, you can easily power up everything from fishing boats, to runabouts, to cruisers with flexible financing on the engine. You can also choose to finance rigging, gauges, controls and even labor. Mercury Repower Financing offers low rates and low monthly payments to fit a boater’s budget.
Owners Manuals
Need an Owner’s Manual for your Mercury engine to perform maintenance, replace parts or just learn more about your engine? Mercury has made it easy for you to purchase a printed copy or to download and print your own copy. To order a printed version of the Service Manual for your particular Mercury Outboard or MerCruiser Engine.
Powerful Performer.
Thanks to its new, long-runner scroll intake manifold which draws in more air and converts it into additional torque, the 4.5L delivers a ground-breaking power-to-weight ratio and gives you V-8 power in a V-6 package.
Smooth & Quiet.
The 4.5L’s newly designed rear-facing throttle body, anti-whistle throttle plate, engine cover and mounts, lightweight flywheel, fuel-supply module, and structural oil pan all work together to deliver a superior idle, smoothness and low vibration. Resulting in an exceptional driving experience.
Corrosion Protection.
The MercFusion Paint System creates an outer seal against the elements, while MerCathode® provides automatic protection against galvanic corrosion. For maximum defense against saltwater effects, the SeaCore® industrial hardcoat anodizing system and closed-cooling circuit is available.
Sporty Handling.
The 4.5L comes standard with Adaptive Speed Control, which automatically maintains engine rpm regardless of load or water conditions. The result is increased throttle response and a sporty feel.
Easy to Maintain.
When service is required, maintenance is a snap with the front-mounted drive lube monitor, color-coded maintenance points – including easy-to-reach oil filter and fill – and “how-to” videos that can be accessed via the QR code on the label.
SPECS:
HP / kW
250 / 184
Maximum RPM (WOT)
4800-5200
Engine type
V6, 2-valve/cylinder pushrod
Displacement (L)
4.5
Displacement (CID/L)
275 / 4.5
Bore and stroke
4.0 x 3.6" / 102 x 92 mm
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol
Maximum
Fuel ethanol tolerance
Up to 10%
Fuel requirement
90 RON 10% Ethanol Maximum
Unleaded Regular 87 Octane Minimum (R M/2)
Engine control system
Mechanical Shifting with Optional SmartCraft DTS
Standard SmartCraft with Electronic Throttle Control
Fuel delivery system
Computer controlled Multi-Port Electronic Fuel Injection (MPI)
Air induction
Performance-Tuned Scroll Intake Manifold
Ignition
SmartCraft PCM 112 Digital Inductive
Alternator amp / Watt
70 amp / 882 watt (Belt-Driven)
Water drain system
Air Actuated "Season Extender" (Bravo)
Easy Drain "Season Extender" (Alpha)
Exhaust system
Through prop
Cooling system
Water cooled with thermostat; FWC available as factory option (Alpha) and packaged with SeaCore Drive (Bravo)
Lubrication system
Integrated wet sump
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine guardian system
SmartCraft Engine Guardian
Dimensions (L x W x H)
28 x 30 x 22" / 696 x 740 x 559 mm
Weight (engine only)
761 lbs / 345 kg
Compatible drives
Alpha
Bravo One
Bravo Three
Bravo Two
Also you can check product : New Mercury 230 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
Featuring a host of engineering innovations, the 4.5L series establishes new standards for power-to-weight ratio, driver experience, acceleration, durability, and ease of maintenance.Built for Marine: Designing a V-6 block solely for marine use allows Mercury to build the 4.5L with the ultimate protection system, using cast-iron componentry where the engine intersects with seawater, and using corrosion-resistant aluminum and composites everywhere else.
New Mercury 115HP PRO XS 115ELPT Pro XS Outboard Engine - Sale !! (115ELPT Pro XS)
The new Mercury 115 HP PRO XS is the synonym of performance and reliability. It has all the design-based popular features of the Mercury 115 FourStroke engine with some additional characteristics. This inline-four motor has an 8-valve single overhead cam with a 2.1L displacement to generate 5300-6300 RPM at full throttle.
Besides, it has the Command Thrust gearcase to make it compatible with large-size propellers and help deliver better performance. This boat motor has a reputation for superior holeshot, quicker acceleration, durability and fastest top speed than its nearest competitors. If you are a fresh or saltwater angler, the 115 HP Pro XS will fit perfectly in your requirement.
What’s more, is the 5-year warranty (3-year standard warranty and 2-year Mercury Product Protection Gold Plan) that you get with the purchase of this engine. It is ideal for 17-18’ aluminum and fiberglass bass boats, pontoons, and flats and bay boats in the same size range.
SPECS :
Engine
Engine Power 115 HP (86 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 2.1 L
Throttle RPM: 5300-6300
Oil Type Recommended: NMMA Certified FCW SAE 10W-30
Gear Ratio (Primary) 2.07:1 | Shift: F-N-R
Bore 3.5" (90 mm)
Stroke 3.2" (81 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 07 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Dual cable mechanical | Hydraulic power steering
Cooling Water-cooled with thermostat
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range: 70° (-6° to 64°)
Electric
Starter Electric (turn-key) l Smart Start Electric
Fuel System
Fuel System Electronic Fuel Injection (EFI) l Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length Shaft: 20" (508 mm) l 25" (635 mm)
Capacities
Oil capacity 5.5 qts (5.2 l)
Weights
Dry Weight Lightest model available: 359 lbs (163 kg)
Features :
Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Mechanical throttle & shift l Trim system: Power Tilt/Power Trim
Color
Colors Phantom Black
Also you can check product : New Mercury 170 TIER 3 172.4 HP 2.0L Inboard Diesel Engine - Sale !!
Besides, it has the Command Thrust gearcase to make it compatible with large-size propellers and help deliver better performance. This boat motor has a reputation for superior holeshot, quicker acceleration, durability and fastest top speed than its nearest competitors. If you are a fresh or saltwater angler, the 115 HP Pro XS will fit perfectly in your requirement.
What’s more, is the 5-year warranty (3-year standard warranty and 2-year Mercury Product Protection Gold Plan) that you get with the purchase of this engine. It is ideal for 17-18’ aluminum and fiberglass bass boats, pontoons, and flats and bay boats in the same size range.
SPECS :
Engine
Engine Power 115 HP (86 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 2.1 L
Throttle RPM: 5300-6300
Oil Type Recommended: NMMA Certified FCW SAE 10W-30
Gear Ratio (Primary) 2.07:1 | Shift: F-N-R
Bore 3.5" (90 mm)
Stroke 3.2" (81 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 07 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Dual cable mechanical | Hydraulic power steering
Cooling Water-cooled with thermostat
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 22° (-6° to 16°) | Maximum Tilt Range: 70° (-6° to 64°)
Electric
Starter Electric (turn-key) l Smart Start Electric
Fuel System
Fuel System Electronic Fuel Injection (EFI) l Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length Shaft: 20" (508 mm) l 25" (635 mm)
Capacities
Oil capacity 5.5 qts (5.2 l)
Weights
Dry Weight Lightest model available: 359 lbs (163 kg)
Features :
Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Mechanical throttle & shift l Trim system: Power Tilt/Power Trim
Color
Colors Phantom Black
Also you can check product : New Mercury 170 TIER 3 172.4 HP 2.0L Inboard Diesel Engine - Sale !!
When you're feeding your need for speed, Mercury Pro XS engines will get you there faster. Engineered to meet the demands for high speeds on fresh or salt water, these high-performance motors deliver a winning combination of power, acceleration, durability, and fuel efficiency. Ideal for a wide range of fresh and saltwater boats. Great for compact bass, multi-species, flats and bay boats, and pontoons.
New Mercury 40HP SeaPro Command Thrust 40ELHPT Outboard Engine - Sale !! (40ELHPT)
New Mercury 40HP SeaPro Command Thrust 40ELHPT Outboard Engine
ENGINEERED FOR COMMERCIAL: Engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done, the 60 and 40hp SeaPro engines are validated to three times the engine life of a recreational engine.
COMMAND THRUST GEARCASE: The 60 and 40hp SeaPro engines come standard with the Command Thrust gearcase. Its larger torpedo, combined with a bigger-diameter prop, can lift a heavy boat onto plane more easily and hold it there at lower speeds without impacting top speed.
CORROSION RESISTANCE: Mercury’s proprietary formula – XK360, is an extremely low copper content aluminium alloy, which leads the industry in corrosion resistance. This makes costly corrosion failures and high labor bills a thing of the past. Most competitors use alloys with 2% to 4% copper content which will corrode faster than our MercAlloy, XK360 or A356 alloys.
MERCURY SMARTCRAFT®: SmartCraft compatibility for 25hp and higher SeaPro outboards makes every job easier thanks to intelligent digital gauges, touchscreen VesselView® displays and advanced technologies such as Troll Control and Active Trim, which help you maintain engine speed and optimize performance.
REPOWER WITH SEAPRO: The compact size also means older boats not initially designed for the weight of heavier four-stroke outboards can now be repowered and reborn to perform at their best with the latest technology.
Air induction - Performance-Tuned Scroll Intake Manifold
Recommended fuel - Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Controls - Mechanical throttle & shift
SPECS :
Engine
Engine Power 40 HP (30 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 60.8 CID (995 CC)
Oil Type Recommended: NMMA Certified FCW SAE 25W-40
Gear Ratio (Primary) 2.33:1
Bore 2.56" (65 mm)
Stroke 2.95" (75 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 07 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Hydraulic | Mechanical
Cooling Water-cooled with thermostat
Exhaust Through prop
Electric
Alternator 18 amp (226 watt)
Starter Electric (turn-key)
Fuel System
Fuel System Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length Shaf: 20" (508 mm) | 22.5" (572 mm) | 25" (635 mm)
Capacities
Oil capacity 3.0 qts (2.8 l)
Weights
Dry Weight Lightest model available: 260 lbs (118 kg)
FEATURES :
Engine protection operator warning system: SmartCraft Engine Guardian l Controls: Mechanical throttle & shift l Trim system: Gas Assist available/Power Tilt/Power Trim
Also you can check product : New Mercury 150 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
ENGINEERED FOR COMMERCIAL: Engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done, the 60 and 40hp SeaPro engines are validated to three times the engine life of a recreational engine.
COMMAND THRUST GEARCASE: The 60 and 40hp SeaPro engines come standard with the Command Thrust gearcase. Its larger torpedo, combined with a bigger-diameter prop, can lift a heavy boat onto plane more easily and hold it there at lower speeds without impacting top speed.
CORROSION RESISTANCE: Mercury’s proprietary formula – XK360, is an extremely low copper content aluminium alloy, which leads the industry in corrosion resistance. This makes costly corrosion failures and high labor bills a thing of the past. Most competitors use alloys with 2% to 4% copper content which will corrode faster than our MercAlloy, XK360 or A356 alloys.
MERCURY SMARTCRAFT®: SmartCraft compatibility for 25hp and higher SeaPro outboards makes every job easier thanks to intelligent digital gauges, touchscreen VesselView® displays and advanced technologies such as Troll Control and Active Trim, which help you maintain engine speed and optimize performance.
REPOWER WITH SEAPRO: The compact size also means older boats not initially designed for the weight of heavier four-stroke outboards can now be repowered and reborn to perform at their best with the latest technology.
Air induction - Performance-Tuned Scroll Intake Manifold
Recommended fuel - Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Controls - Mechanical throttle & shift
SPECS :
Engine
Engine Power 40 HP (30 KW)
Engine Type 8-valve single overhead cam (SOHC) | Inline 4
Displacement 60.8 CID (995 CC)
Oil Type Recommended: NMMA Certified FCW SAE 25W-40
Gear Ratio (Primary) 2.33:1
Bore 2.56" (65 mm)
Stroke 2.95" (75 mm)
Lubrication Wet sump
Ignition SmartCraft ECM 07 Digital Inductive
Induction Air induction: Performance-Tuned Scroll Intake Manifold
Steering Big Tiller Compatible | Hydraulic | Mechanical
Cooling Water-cooled with thermostat
Exhaust Through prop
Electric
Alternator 18 amp (226 watt)
Starter Electric (turn-key)
Fuel System
Fuel System Induction: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length Shaf: 20" (508 mm) | 22.5" (572 mm) | 25" (635 mm)
Capacities
Oil capacity 3.0 qts (2.8 l)
Weights
Dry Weight Lightest model available: 260 lbs (118 kg)
FEATURES :
Engine protection operator warning system: SmartCraft Engine Guardian l Controls: Mechanical throttle & shift l Trim system: Gas Assist available/Power Tilt/Power Trim
Also you can check product : New Mercury 150 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !!
Season after season, these durable, easy-to-maintain SeaPro commercial outboards deliver reliable starts and improved fuel efficiency. By generating serious torque at low rpm, they provide more power with less stress on the engine. Get on plane faster – and stay there longer at lower speeds.
New Mercury 90HP SeaPro Command Thrust 90ELPT Outboard Engine - Sale !! (90ELPT)
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
Ultra-compact. Ultra-efficient. Ultra-durable. A motor that works hard all day long, day after day, in the toughest conditions. For commercial fishing vessels, commercial workboats and law-enforcement boats.
Features
MERCURY SEAPRO ENGINES EXCEL IN THAILAND: Sakchai Homsub and his team are out on the water 365 days a year, bringing tourists around the islands surrounding Pattaya, Thailand. As his customers rely on him, he counts on his SeaPro engines to deliver the performance required to take them out on the water day in, day out.
HARSH CONDITIONS CAN’T DETER SEAPRO: TowBoatUS and commercial boat builders turn to Mercury Marine’s SeaPro engines because they’re engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done.
THE MERCURY EDGE: ANTI-CORROSION PROTECTION: Mercury SeaPro four-stroke outboards offer superior protection against corrosion with the industry's lowest-copper aluminum alloy. And the life of critical components is extended with more stainless steel.
SPECS :
HP / kW
90 / 67
Engine type
8-valve single overhead cam (SOHC)
Inline 4
Displacement (L)
2.1
Full throttle RPM
5000-5500
Air induction
Performance-Tuned Scroll Intake Manifold
Fuel induction system
Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Alternator amp / Watt
35 amp / 441 watt with water-cooled voltage regulator
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Smart Start Electric
Controls
Mechanical throttle & shift
Steering
Big Tiller
Dual cable mechanical
Hydraulic
Shaft length
20" / 508 mm
25" / 635 mm
Gearcase ratio
2.38:1
Dry weight *Lightest model available
363 lbs / 165 kg
CARB star rating
3
Bore and stroke
3.5 x 3.2" / 90 x 81 mm
Ignition
SmartCraft ECM 70 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Cooling system
Water-cooled with thermostat
Gear shift
F-N-R
Gearcase options
Command Thrust
Trim system
Power Tilt
Power Trim
Exhaust system
Through prop
Shallow water trim range (degrees)
20
Color
Phantom Black
Lubrication system
Wet sump
Oil Capacity
5.5 qts / 5.2l
Maximum Trim Range
22° (-6° to 16°)
Maximum Tilt Range
70° (-6° to 64°)
Also you can check product : New Mercury 150 TIER 3 152.1 HP 2.0L Inboard Diesel Engine - Sale !!
Ultra-compact. Ultra-efficient. Ultra-durable. A motor that works hard all day long, day after day, in the toughest conditions. For commercial fishing vessels, commercial workboats and law-enforcement boats.
Features
MERCURY SEAPRO ENGINES EXCEL IN THAILAND: Sakchai Homsub and his team are out on the water 365 days a year, bringing tourists around the islands surrounding Pattaya, Thailand. As his customers rely on him, he counts on his SeaPro engines to deliver the performance required to take them out on the water day in, day out.
HARSH CONDITIONS CAN’T DETER SEAPRO: TowBoatUS and commercial boat builders turn to Mercury Marine’s SeaPro engines because they’re engineered to deliver longer engine life while maintaining the power and performance necessary to get the job done.
THE MERCURY EDGE: ANTI-CORROSION PROTECTION: Mercury SeaPro four-stroke outboards offer superior protection against corrosion with the industry's lowest-copper aluminum alloy. And the life of critical components is extended with more stainless steel.
SPECS :
HP / kW
90 / 67
Engine type
8-valve single overhead cam (SOHC)
Inline 4
Displacement (L)
2.1
Full throttle RPM
5000-5500
Air induction
Performance-Tuned Scroll Intake Manifold
Fuel induction system
Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Alternator amp / Watt
35 amp / 441 watt with water-cooled voltage regulator
Recommended fuel
Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Recommended oil
NMMA Certified FCW 25W-40 Synthetic Blend
Engine protection operator warning system
SmartCraft Engine Guardian
Compatible with SmartCraft digital technology
Yes
Starting
Smart Start Electric
Controls
Mechanical throttle & shift
Steering
Big Tiller
Dual cable mechanical
Hydraulic
Shaft length
20" / 508 mm
25" / 635 mm
Gearcase ratio
2.38:1
Dry weight *Lightest model available
363 lbs / 165 kg
CARB star rating
3
Bore and stroke
3.5 x 3.2" / 90 x 81 mm
Ignition
SmartCraft ECM 70 Digital Inductive
Fuel system
Electronic Fuel Injection (EFI)
Cooling system
Water-cooled with thermostat
Gear shift
F-N-R
Gearcase options
Command Thrust
Trim system
Power Tilt
Power Trim
Exhaust system
Through prop
Shallow water trim range (degrees)
20
Color
Phantom Black
Lubrication system
Wet sump
Oil Capacity
5.5 qts / 5.2l
Maximum Trim Range
22° (-6° to 16°)
Maximum Tilt Range
70° (-6° to 64°)
Also you can check product : New Mercury 150 TIER 3 152.1 HP 2.0L Inboard Diesel Engine - Sale !!
The SeaPro mid-range outboards take working to the next level—uncommonly powerful, uniquely compact, uncompromisingly reliable, and unbelievably fuel efficient. To maximize durability, upper mounts are twice as stiff as recreational models. The compact size of these mid-range outboards lets you refit older boats with more horsepower enabling them to perform better than ever with the latest technology. They're the engines with the toughness and durability you need to get the job done.
New Mercury 200XL SeaPro Commercial DTS 25" Outboard Engine - Sale !! (200XL SeaPro DTS)
Intuitive, Innovative Features
Adaptive Speed Control
Maintain engine rpm despite changes in load or conditions, with no throttle adjustment.
Industry-Exclusive Battery Management Technology
When needed, the idle charge battery management system works for you by monitoring battery voltage and adjusting engine rpm at idle to boost alternator output.
Easy to Maintain
The industry-exclusive top-cowl access door eliminates hassle, allowing you to check or top off oil without removing the cowl. And gearcase oil can easily be drained from the torpedo.
Heavy Duty Gearcase
SeaPro gearcases are validated at three times the lifespan of a recreational gearcase. The V10 SeaPro engine features an all-new rugged gearcase with advanced hydrodynamics for control, efficiency and durability.
Reliability & Durability
High-horsepower SeaPro outboards generate ample torque at lower rpm levels, enabling operators to work their outboards hard without placing excess stress on the engine.
TIME TO REPOWER WITH SEAPRO ADVANTAGE
The SeaPro series engines from Mercury Marine fulfil the needs of commercial applications by generating more power and less engine stress. When you spend a whole day on the water for search & rescue, whale watching, fishing and doing other activities, you wish for a controlled throttle experience to make things easier. And the Mercury SeaPro 200XL 4S DTS Outboard provides the confidence you require with its unprecedented performance in different water conditions.
DTS Advantage: Mercury’s DTS (Digital Throttle and Shift) brings out the best from the outboard and takes your boat performance to the next level. It enables an instant throttle response, precise handling & control, minimum or no lag, and smooth acceleration. Unlike the mechanical cable, the electronic throttle control in DTS passes the commands through the boat motor’s computer via sensors and wires. This arrangement makes the throttle control easy & quick. Also, the steady, digital throttle control enables better fuel efficiency.
The Mercury 200XL DTS SeaPro has a Conventional MidSection (CMS), 3.4L V6 cylinder head with 209 CID displacement, an electric start system, and a speed of 4600-5400 RPM at full throttle. This engine also boasts EFI (Electronic Fuel Injection) computer-controlled system that enables advanced range optimization for better fuel delivery and allows you to travel more distance with less fuel.
SPECS :
Engine
Engine Power 200 HP (149 KW)
Engine Type V6
Displacement 209 CID (3.4 L)
Throttle Full RPM: 4600-5400
Oil Type Recommended: NMMA Certified FCW SAE 25W-40
Gear Ratio (Primary) 1.85:1 | Shift: F-N-R
Emissions CARB Star Rating: 3
Cylinder Liners Configuration: V-6 [64 degree] with Dual Overhead Cam [DOHC] and 24-valves
Bore 3.6 in (92 mm)
Stroke 3.4 in (86 mm)
Lubrication Integrated wet sump
Ignition SmartCraft PCM 112 Digital Inductive
Induction Air induction: Performance-Tuned Long-Runner Intake Manifold
Steering Hydraulic
Cooling Water-cooled with thermostat
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 20° (-6° to 14°) l Maximum Tilt Range: 73° (-6° to 67°)
Electric
Alternator With Idle Charge: 85-amp (1071 Watt)
Starter Electric Start with SmartStart Protection
Fuel System
Fuel System Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length 20" (508 mm) | 25" (635 mm)
Capacities
Oil capacity 7.0 Quarts (6.6 Liters)
Weights
Dry Weight Lightest model available: 483 lbs (220 kgs)
Features
MidSection: Conventional MidSection l Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Remote Mechanical or Digital Throttle & Shift (DTS) l Trim system: Power trim and tilt l Counter Rotation: Available
Color
Colors Phantom Black
Also you can check product : New Mercury 350 HP ECT 6.2L Inboard Engine - Sale !!
Adaptive Speed Control
Maintain engine rpm despite changes in load or conditions, with no throttle adjustment.
Industry-Exclusive Battery Management Technology
When needed, the idle charge battery management system works for you by monitoring battery voltage and adjusting engine rpm at idle to boost alternator output.
Easy to Maintain
The industry-exclusive top-cowl access door eliminates hassle, allowing you to check or top off oil without removing the cowl. And gearcase oil can easily be drained from the torpedo.
Heavy Duty Gearcase
SeaPro gearcases are validated at three times the lifespan of a recreational gearcase. The V10 SeaPro engine features an all-new rugged gearcase with advanced hydrodynamics for control, efficiency and durability.
Reliability & Durability
High-horsepower SeaPro outboards generate ample torque at lower rpm levels, enabling operators to work their outboards hard without placing excess stress on the engine.
TIME TO REPOWER WITH SEAPRO ADVANTAGE
The SeaPro series engines from Mercury Marine fulfil the needs of commercial applications by generating more power and less engine stress. When you spend a whole day on the water for search & rescue, whale watching, fishing and doing other activities, you wish for a controlled throttle experience to make things easier. And the Mercury SeaPro 200XL 4S DTS Outboard provides the confidence you require with its unprecedented performance in different water conditions.
DTS Advantage: Mercury’s DTS (Digital Throttle and Shift) brings out the best from the outboard and takes your boat performance to the next level. It enables an instant throttle response, precise handling & control, minimum or no lag, and smooth acceleration. Unlike the mechanical cable, the electronic throttle control in DTS passes the commands through the boat motor’s computer via sensors and wires. This arrangement makes the throttle control easy & quick. Also, the steady, digital throttle control enables better fuel efficiency.
The Mercury 200XL DTS SeaPro has a Conventional MidSection (CMS), 3.4L V6 cylinder head with 209 CID displacement, an electric start system, and a speed of 4600-5400 RPM at full throttle. This engine also boasts EFI (Electronic Fuel Injection) computer-controlled system that enables advanced range optimization for better fuel delivery and allows you to travel more distance with less fuel.
SPECS :
Engine
Engine Power 200 HP (149 KW)
Engine Type V6
Displacement 209 CID (3.4 L)
Throttle Full RPM: 4600-5400
Oil Type Recommended: NMMA Certified FCW SAE 25W-40
Gear Ratio (Primary) 1.85:1 | Shift: F-N-R
Emissions CARB Star Rating: 3
Cylinder Liners Configuration: V-6 [64 degree] with Dual Overhead Cam [DOHC] and 24-valves
Bore 3.6 in (92 mm)
Stroke 3.4 in (86 mm)
Lubrication Integrated wet sump
Ignition SmartCraft PCM 112 Digital Inductive
Induction Air induction: Performance-Tuned Long-Runner Intake Manifold
Steering Hydraulic
Cooling Water-cooled with thermostat
Exhaust Through prop
Operational
Operating Conditions Maximum Trim Range: 20° (-6° to 14°) l Maximum Tilt Range: 73° (-6° to 67°)
Electric
Alternator With Idle Charge: 85-amp (1071 Watt)
Starter Electric Start with SmartStart Protection
Fuel System
Fuel System Induction: Electronic Fuel Injection (EFI) Computer Controlled with Advanced Range Optimization
Fuel Type Recommended: Unleaded Regular 87 Octane Minimum (R M/2) or 90 RON 10% Ethanol Maximum
Dimensions
Length 20" (508 mm) | 25" (635 mm)
Capacities
Oil capacity 7.0 Quarts (6.6 Liters)
Weights
Dry Weight Lightest model available: 483 lbs (220 kgs)
Features
MidSection: Conventional MidSection l Engine protection operator warning system: SmartCraft Engine Guardian l Compatible with SmartCraft digital technology: Yes l Controls: Remote Mechanical or Digital Throttle & Shift (DTS) l Trim system: Power trim and tilt l Counter Rotation: Available
Color
Colors Phantom Black
Also you can check product : New Mercury 350 HP ECT 6.2L Inboard Engine - Sale !!
The SeaPro series engines from Mercury Marine fulfil the needs of commercial applications by generating more power and less engine stress. When you spend a whole day on the water for search & rescue, whale watching, fishing and doing other activities, you wish for a controlled throttle experience to make things easier. And the Mercury SeaPro 200XL 4S DTS Outboard provides the confidence you require with its unprecedented performance in different water conditions. Every day, even in the toughest conditions, SeaPro high-horsepower outboards are built to tackle the biggest jobs. They feature heavy-duty components designed to work as hard as you do, with unmatched corrosion resistance to go wherever the task takes you.
New Mercury Avator 35e Electric Outboard Motor - Sale !! (Avator 35e)
Intuitive, Innovative Features
Modular Batteries
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.
Multi-Purpose Tiller Handle
The tiller handle adjusts up, down, left or right for comfortable steering from any position, with either hand. No tools required.
Strong Transverse Flux Motor
Industry-first transverse flux motor technology delivers immediate torque and reliable, efficient power. The motor turns a high-thrust three-blade prop that further optimizes battery life.
Power Center
The Power Center is an integrated hub that distributes power from the battery bank throughout the system. It can also simultaneously charge up to four connected batteries from a single charging port.
Digital Controls
For console boats, digital remote controls deliver instant throttle response, with no hesitation. Controls are available in three styles to fit a range of center- and side-console mounting positions.
Quick & Fun
The Avator 20e model can accelerate a 12-foot Lund® WC-12 boat at a similar rate as a 5hp four-stroke outboard, while the 35e model’s acceleration is similar to a 9.9hp four-stroke.
Smooth & Quiet
Smooth, quiet electric power will get you where you’re going without interrupting the conversation.
Superior Efficiency
From the transverse flux motor to the lithium-ion batteries, we’ve optimized every aspect of the Avator propulsion system to deliver more efficient overall performance than the competition.
Avator Advantage
Smooth Performance
Vibration-isolating components help ensure your ride is quiet and smooth, keeping you better connected with nature.
Sustainability
Avator outboards transform the boating experience by making boating possible with no exhaust fumes and zero direct emissions.
Corrosion Resistance
Every Avator outboard is engineered with Mercury’s proven corrosion-preventive materials and coatings, so you can boat confidently in freshwater or saltwater.
Easy Storage and Transport
With no fuel and no fumes, an Avator outboard is convenient to store at home or on your boat.
Avator Accessories and Connected Devices
Avator Displays
Monitor your propulsion system and adjust settings from a vivid full-color display. On tiller models, the display is integrated with the outboard. Dash displays are available for boats with console steering.
SmartCraft Connect and the Mercury Marine App
A Mercury SmartCraft® Connect module comes pre-installed, allowing you to wirelessly connect the outboard to the Mercury Marine mobile app. Use the app to access performance data, visualized range estimates on a GPS map, a tool for connecting with your dealer and much more.
Charge One, Charge All
You can charge batteries individually using the integrated charging port on each battery or charge up to four connected batteries at once using the Power Center’s charging port. When charging individually, the 230W charger can recharge a fully depleted 2300Wh battery in approximately 10 hours. The higher-speed 520W charger can cut the charge time by more than 50 percent. Charging can be done from a standard household outlet.
Accessories
Avator accessory options help protect your outboard and make days on the water easier. They include a custom-fit outboard carrying bag, props, chargers and more.
SPECS :
Name
Avator 35e
Battery
2.3 kWh
Battery IP Rating
IP67
Battery Type
21166
Battery Weight (1kWh)
48 lbs / 21.7 kg
Charger (Standard)
230w
Input Power
4400W
Rated Prop Shaft Power
3700W
Rated Voltage
48
Shaft Length
15 in / 381 mm, 20 in / 508 mm, 25 in / 635 mm
Standard Propeller
7P
Steering
RC / Tiller
Total Weight (Excluding Battery & Transom Bracket)
41 lbs / 18.5 kgs
Total Weight Excluding Battery
47 lbs / 21.3 kgs
Also you can check : New Mercury Avator 20e Electric Outboard Motor - Sale !!
Modular Batteries
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.
Multi-Purpose Tiller Handle
The tiller handle adjusts up, down, left or right for comfortable steering from any position, with either hand. No tools required.
Strong Transverse Flux Motor
Industry-first transverse flux motor technology delivers immediate torque and reliable, efficient power. The motor turns a high-thrust three-blade prop that further optimizes battery life.
Power Center
The Power Center is an integrated hub that distributes power from the battery bank throughout the system. It can also simultaneously charge up to four connected batteries from a single charging port.
Digital Controls
For console boats, digital remote controls deliver instant throttle response, with no hesitation. Controls are available in three styles to fit a range of center- and side-console mounting positions.
Quick & Fun
The Avator 20e model can accelerate a 12-foot Lund® WC-12 boat at a similar rate as a 5hp four-stroke outboard, while the 35e model’s acceleration is similar to a 9.9hp four-stroke.
Smooth & Quiet
Smooth, quiet electric power will get you where you’re going without interrupting the conversation.
Superior Efficiency
From the transverse flux motor to the lithium-ion batteries, we’ve optimized every aspect of the Avator propulsion system to deliver more efficient overall performance than the competition.
Avator Advantage
Smooth Performance
Vibration-isolating components help ensure your ride is quiet and smooth, keeping you better connected with nature.
Sustainability
Avator outboards transform the boating experience by making boating possible with no exhaust fumes and zero direct emissions.
Corrosion Resistance
Every Avator outboard is engineered with Mercury’s proven corrosion-preventive materials and coatings, so you can boat confidently in freshwater or saltwater.
Easy Storage and Transport
With no fuel and no fumes, an Avator outboard is convenient to store at home or on your boat.
Avator Accessories and Connected Devices
Avator Displays
Monitor your propulsion system and adjust settings from a vivid full-color display. On tiller models, the display is integrated with the outboard. Dash displays are available for boats with console steering.
SmartCraft Connect and the Mercury Marine App
A Mercury SmartCraft® Connect module comes pre-installed, allowing you to wirelessly connect the outboard to the Mercury Marine mobile app. Use the app to access performance data, visualized range estimates on a GPS map, a tool for connecting with your dealer and much more.
Charge One, Charge All
You can charge batteries individually using the integrated charging port on each battery or charge up to four connected batteries at once using the Power Center’s charging port. When charging individually, the 230W charger can recharge a fully depleted 2300Wh battery in approximately 10 hours. The higher-speed 520W charger can cut the charge time by more than 50 percent. Charging can be done from a standard household outlet.
Accessories
Avator accessory options help protect your outboard and make days on the water easier. They include a custom-fit outboard carrying bag, props, chargers and more.
SPECS :
Name
Avator 35e
Battery
2.3 kWh
Battery IP Rating
IP67
Battery Type
21166
Battery Weight (1kWh)
48 lbs / 21.7 kg
Charger (Standard)
230w
Input Power
4400W
Rated Prop Shaft Power
3700W
Rated Voltage
48
Shaft Length
15 in / 381 mm, 20 in / 508 mm, 25 in / 635 mm
Standard Propeller
7P
Steering
RC / Tiller
Total Weight (Excluding Battery & Transom Bracket)
41 lbs / 18.5 kgs
Total Weight Excluding Battery
47 lbs / 21.3 kgs
Also you can check : New Mercury Avator 20e Electric Outboard Motor - Sale !!
A Mercury Authorized Dealer will work with you to outfit your boat with the battery capacity you need. You can choose to connect the 20e tiller model directly to one 2300Wh battery for peak simplicity and portability. Outboards with remote controls and the 35e model require an Avator Power Center and at least two batteries. The Power Center allows you to further extend your range and runtime with either outboard model by connecting up to four batteries.Modular batteries and multiple controls, displays and chargers make it easy to optimize your Avator 20e or 35e propulsion system for wherever your imagination leads you.
New Mercury 170 TIER 3 172.4 HP 2.0L Inboard Diesel Engine - Sale !! (170 TIER 3)
Robust and Reliable
Combines reliable power with a compact, robust design.
Clean, Quiet, Efficient.
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury SmartCraft compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Power 172.4 mhp (127 KW)
Engine Type Inline 4
Displacement 2.0 L
Bore 3.27" (83 mm)
Stroke 3.62" (92 mm)
Throttle RPM (WOT): 4000
Cooling System: Closed cooling
Emissions BSO 2 RCD 2 IMO 2 EPA Tier 3
Fuel Usage
Fuel Usage, 100% Load 9.6 gal/hr / 36.4 l/hr @ 4000 rpm
Dimensions
Length 32" (802 mm)
Height 30" (757 mm)
Width 30" (710 mm)
Weight
Engine only: 582 lbs (264 kg) | Incl. transmission: 637 lbs (289 kg) | Alpha: 763 lbs (346 kg) | Bravo One: 802 lbs (364 kg) | Bravo Two: 814 lbs (369 kg) | Bravo Three: 822 lbs (373 kg)
Also you can check product : New Mercury 90HP SeaPro Command Thrust 90ELPT Outboard Engine - Sale !!
Combines reliable power with a compact, robust design.
Clean, Quiet, Efficient.
DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Lightweight.
The TDI engine block is fabricated from Vermicular Graphite Casting (VGC), which has twice the strength of grey iron and most of its attributes, but is 5% to 10% lighter. The end result is low weight, high strength, and maximum heat transfer for optimum cooling.
Power & Performance.
The low weight of these diesels results in best-in-class power-to-weight ratio. Combined with great low-end torque, the end result is crowd-pleasing hole shot, great acceleration, low planing times and ultra-smooth performance.
Intuitive Design.
Mercury SmartCraft compatibility is built into these engines, delivering key information about vital engine functions on an easy-to-read LED display. SmartCraft Digital Throttle & Shift (DTS) offers smooth shifting, immediate throttle response and high-tech digital controls.
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Power 172.4 mhp (127 KW)
Engine Type Inline 4
Displacement 2.0 L
Bore 3.27" (83 mm)
Stroke 3.62" (92 mm)
Throttle RPM (WOT): 4000
Cooling System: Closed cooling
Emissions BSO 2 RCD 2 IMO 2 EPA Tier 3
Fuel Usage
Fuel Usage, 100% Load 9.6 gal/hr / 36.4 l/hr @ 4000 rpm
Dimensions
Length 32" (802 mm)
Height 30" (757 mm)
Width 30" (710 mm)
Weight
Engine only: 582 lbs (264 kg) | Incl. transmission: 637 lbs (289 kg) | Alpha: 763 lbs (346 kg) | Bravo One: 802 lbs (364 kg) | Bravo Two: 814 lbs (369 kg) | Bravo Three: 822 lbs (373 kg)
Also you can check product : New Mercury 90HP SeaPro Command Thrust 90ELPT Outboard Engine - Sale !!
Clean, Quiet, Efficient: DI technology uses injectors to spray diesel fuel atomized at 26,000 psi directly into the main combustion chamber of each cylinder. This process optimizes fuel efficiency and minimizes emissions, along with engine Noise, Vibration and Harshness (NVH) for an enjoyable boating experience.
New Mercury 150 HP Sterndrive 3.0L Inboard Diesel Engine - Sale !! (Mercury 150 HP)
Easy-to-Maintain.
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
Redefining the Standard.
The new Mercury Diesel 3.0L common-rail high-speed engine delivers exceptional performance and offers substantial improvements in acceleration and top speed – all made possible by a new water-cooled variable geometry turbocharger design (VGT). This matched system, plus a state-of-the-art engine control system, provides reduced time to plane and outstanding overall performance.
Reliability Performance.
Enjoying your time on the water is more easily achieved with an engine that performs day in and day out. Mercury Diesel’s 3.0L engine is assembled in a state-of-the-art manufacturing facility that employs the latest in quality practices and control, ensuring ultimate confidence in reliability. Combine the reliability and performance of the Mercury Diesel 3.0L with Mercury’s proprietary SmartCraft system and a full suite of accessories that contribute to an unsurpassed boating experience.
Quiet Performer.
The Mercury Diesel 3.0L delivers exhilarating performance while minimizing noise and vibration, while the air filter doubles as a silencer that removes the turbo whine historically associated with diesel engines. The motor mounts are designed to minimize vibration. Having a conversation while cruising has never been easier.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Many features available to make your tow sport adventures even more amazing
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Turbocharger Cooling: Closed cooled | Stop: ECU Controlled | Control Unit (ECU): Bosch EDC17
Engine Type V6
Engine Power 150 HP
Displacement 3.0 L
Cylinder Liners Valves per Cylinder: 4
Throttle Maximum (WOT): 3000 RPM | Peak Torque: 493 Nm @ 2000 rpm | and shift: Mercury DTS or Mechanical Cable
Bore 3.27" (83 mm)
Stroke 6.62" (92 mm)
Cooling Coolers: Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell
Compression Ratio 16.5:1
Gauges Helm and gauge compatibility: Mercury SmartCraft
Electric
Electrical System: 12 V, 110 A w/ conveniently located battery power and ground studs
Fuel System
Fuel System High pressure common rail
Dimensions
Length 36.7" (847 mm)
Width 33.4" (849 mm)
Height 32.0" (813 mm)
Dimensions Seawater pump inlet size: 1.5 in (38 mm) | Flywheel size: 11.42 in (290 mm) SAE 8
Capacities
Volume Oil sump: 8.5 L | Coolant: 12 L
Weights
Dry Weight 789 lbs (358 Kg)
FEATURES :
Air Handling: Turbocharged and Aftercooled l Rotation: Counter clockwise facing flywheel l Fuel lift pump: On engine l High pressure fuel pump: Bosch CP 4.2 w/ integrated gear lift pump | Pistons: Oil jet cooled | Fuel injectors: Bosch CRS 2.20 (Solenoid) l Glow Plugs: Standard equipment with Bosch glow plug control unit (GCU) | Air inlet (Starboard Rear): Filtered and silenced l Turbocharger: Honeywell VGT l Dipstick range: 1.0 L l Oil maintenance interval: 200 hours or annually l MerCathode (Sterndrive only): Engine mounted l Mercury Joystick Piloting: Compatible with Joystick Piloting for Sterndrives (Axius) l Sensors: Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure.
Also you can check product : New Mercury 250 HP ECT 4.5L Inboard Engine - Sale !!
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.
Redefining the Standard.
The new Mercury Diesel 3.0L common-rail high-speed engine delivers exceptional performance and offers substantial improvements in acceleration and top speed – all made possible by a new water-cooled variable geometry turbocharger design (VGT). This matched system, plus a state-of-the-art engine control system, provides reduced time to plane and outstanding overall performance.
Reliability Performance.
Enjoying your time on the water is more easily achieved with an engine that performs day in and day out. Mercury Diesel’s 3.0L engine is assembled in a state-of-the-art manufacturing facility that employs the latest in quality practices and control, ensuring ultimate confidence in reliability. Combine the reliability and performance of the Mercury Diesel 3.0L with Mercury’s proprietary SmartCraft system and a full suite of accessories that contribute to an unsurpassed boating experience.
Quiet Performer.
The Mercury Diesel 3.0L delivers exhilarating performance while minimizing noise and vibration, while the air filter doubles as a silencer that removes the turbo whine historically associated with diesel engines. The motor mounts are designed to minimize vibration. Having a conversation while cruising has never been easier.
Joystick Piloting for Inboards.
The only joystick piloting system that’s compatible with gasoline or diesel inboard and tow sport engines.
The only joystick piloting system for single-inboard boats.
Many features available to make your tow sport adventures even more amazing
Corrosion-Resistance.
Mercury diesels feature state-of-the-art anti-corrosion, including a thermostatically controlled closed water-cooled system. Water-cooled engine oil, gear oil and steering fluid decrease engine-room temperatures, extending engine life. The SeaCore system is available for the ultimate in saltwater protection.
SPECS :
Engine
Engine Turbocharger Cooling: Closed cooled | Stop: ECU Controlled | Control Unit (ECU): Bosch EDC17
Engine Type V6
Engine Power 150 HP
Displacement 3.0 L
Cylinder Liners Valves per Cylinder: 4
Throttle Maximum (WOT): 3000 RPM | Peak Torque: 493 Nm @ 2000 rpm | and shift: Mercury DTS or Mechanical Cable
Bore 3.27" (83 mm)
Stroke 6.62" (92 mm)
Cooling Coolers: Aftercooler, Engine Coolant, Engine Oil, Power Steering / Gear Oil and Fuel - All are tube and shell
Compression Ratio 16.5:1
Gauges Helm and gauge compatibility: Mercury SmartCraft
Electric
Electrical System: 12 V, 110 A w/ conveniently located battery power and ground studs
Fuel System
Fuel System High pressure common rail
Dimensions
Length 36.7" (847 mm)
Width 33.4" (849 mm)
Height 32.0" (813 mm)
Dimensions Seawater pump inlet size: 1.5 in (38 mm) | Flywheel size: 11.42 in (290 mm) SAE 8
Capacities
Volume Oil sump: 8.5 L | Coolant: 12 L
Weights
Dry Weight 789 lbs (358 Kg)
FEATURES :
Air Handling: Turbocharged and Aftercooled l Rotation: Counter clockwise facing flywheel l Fuel lift pump: On engine l High pressure fuel pump: Bosch CP 4.2 w/ integrated gear lift pump | Pistons: Oil jet cooled | Fuel injectors: Bosch CRS 2.20 (Solenoid) l Glow Plugs: Standard equipment with Bosch glow plug control unit (GCU) | Air inlet (Starboard Rear): Filtered and silenced l Turbocharger: Honeywell VGT l Dipstick range: 1.0 L l Oil maintenance interval: 200 hours or annually l MerCathode (Sterndrive only): Engine mounted l Mercury Joystick Piloting: Compatible with Joystick Piloting for Sterndrives (Axius) l Sensors: Crank & cam position, intake manifold pressure/temp, compressor outlet temp, exhaust gas temp, fuel temp, rail pressure, water in fuel (WIF), oil pressure/temp, coolant temp, seawater pressure/temp, atmospheric pressure.
Also you can check product : New Mercury 250 HP ECT 4.5L Inboard Engine - Sale !!
Mercury Diesel’s 3.0L engine simplifies maintenance by locating service points at the front of the engine. The oil, coolant, fuse box, seawater strainer, drive lube (sterndrive only) and power steering fluid (sterndrive only) service points are located at the front of the engine next to Mercury’s color-coded maintenance schedule to provide easy-to-understand service guidelines and easy-to-reach access.